Boreal forest regions, including East Siberia, have experienced elevated fire activity in recent years, leading to record\uffe2\uff80\uff90breaking greenhouse gas emissions and severe air pollution. However, our understanding of the factors that eventually halt fire spread and thus limit fire growth remains incomplete, hindering our ability to model their dynamics and predict their impacts. We investigated the locations and timing of 2.2 million fire stops\uffe2\uff80\uff94defined as 300\uffe2\uff80\uff89m unburned pixels along fire perimeters\uffe2\uff80\uff94across the vast East Siberian taiga. Fire stops were retrieved from remote sensing data covering over 27,000 individual fires that collectively burned 80 Mha between 2012 and 2022. Several geospatial datasets, including hourly fire weather data and landscape variables, were used to identify the factors contributing to individual fire stops. Our analysis attributed 87% of all fire stops to a statistically significant (p\uffe2\uff80\uff89<\uffe2\uff80\uff890.01) change in one or more of these drivers, with fire\uffe2\uff80\uff90weather drivers limiting fire growth over time and landscape drivers constraining it across space. We found clear regional and temporal variations in the importance of these drivers. For instance, landscape drivers\uffe2\uff80\uff94such as less flammable land cover and the presence of roads\uffe2\uff80\uff94were key constraints on fire growth in southeastern Siberia, where the landscape is more populated and fragmented. In contrast, fire weather was the primary constraint on fire growth in the remote northern taiga. Additionally, in central Yakutia, a major fire hotspot in recent years, fuel limitations from previous fires increasingly restricted fire spread. The methodology we present is adaptable to other biomes and can be applied globally, providing a framework for future attribution studies on global fire growth limitations. In northeast Siberia, we found that with increasing droughts and heatwaves, remote northern fires could potentially grow even larger in the future, with major implications for the global carbon cycle and climate.Plastics used in agriculture, commonly known as agriplastics (AP), offer numerous advantages in terrestrial agriculture, forestry, fisheries and aquaculture, but the diffusion of AP-intensive practices has led to extensive pollution. This review aims to synthesise scientific and policy discussions surrounding AP, examining evidence of their benefits and detrimental environmental and agricultural impacts. Following the proposal of a preliminary general taxonomy of AP, this paper presents the findings from a survey conducted among international experts from the plastic industry, farmer organisations, NGOs and environmental research institutes. This analysis highlights knowledge gaps, demands and perspectives for the sustainable future use of AP. Stakeholder positions vary on the options of \uffe2\uff80\uff98rejection\uffe2\uff80\uff99 or \uffe2\uff80\uff98reduction\uffe2\uff80\uff99 of AP, as well as the role of alternative materials such as (bio)degradable and compostable plastics. However, there is consensus on critical issues such as redesign, labelling, traceability, environmental safety standards, deployment and retrieval standards, as well as innovative waste management approaches. All stakeholders express concern for the environment. A \uffe2\uff80\uff98best practice\uffe2\uff80\uff99-based circular model was elaborated capturing these perspectives. In the context of global food systems increasingly reliant on AP, scientists emphasise the need to simultaneously preserve nature-based and traditional knowledge-based sustainable agricultural practices to enhance food system resilience.The land surface controls the partitioning of water and energy fluxes and therefore plays a crucial role in the climate system. The coupling between soil moisture and air temperature, in particular, has been shown to affect the severity and occurrence of temperature extremes and heat waves. Here we study soil moisture\uffe2\uff80\uff90temperature coupling in five land surface models, focusing on the terrestrial segment of the coupling in the warm season. All models are run off\uffe2\uff80\uff90line over a common period with identical atmospheric forcing data, in order to allow differences in the results to be attributed to the models' partitioning of energy and water fluxes. Coupling is calculated according to two semiempirical metrics, and results are compared to observational flux tower data. Results show that the locations of the global hot spots of soil moisture\uffe2\uff80\uff90temperature coupling are similar across all models and for both metrics. In agreement with previous studies, these areas are located in transitional climate regimes. The magnitude and local patterns of model coupling, however, can vary considerably. Model coupling fields are compared to tower data, bearing in mind the limitations in the geographical distribution of flux towers and the differences in representative area of models and in situ data. Nevertheless, model coupling correlates in space with the tower\uffe2\uff80\uff90based results (r = 0.5\uffe2\uff80\uff930.7), with the multimodel mean performing similarly to the best\uffe2\uff80\uff90performing model. Intermodel differences are also found in the evaporative fractions and may relate to errors in model parameterizations and ancillary data of soil and vegetation characteristics.
", "keywords": ["ENVIRONMENT SIMULATOR JULES", "FLUXES", "0207 environmental engineering", "02 engineering and technology", "01 natural sciences", "CO2 EXCHANGE", "models", "WATER", "SCALE", "Research Articles", "0105 earth and related environmental sciences", "land surface", "CARBON-DIOXIDE EXCHANGE", "eartH2Observe", "temperature", "15. Life on land", "DECIDUOUS FOREST", "CLIMATE", "EVAPORATION", "VARIABILITY", "13. Climate action", "Earth and Environmental Sciences", "BALANCE", "land surface models", "SENSIBLE HEAT", "land-atmosphere interactions", "soil moisture"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2017JD027346"}, {"href": "https://doi.org/10.1002/2017JD027346"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Atmospheres", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2017JD027346", "name": "item", "description": "10.1002/2017JD027346", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2017JD027346"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2018-02-01T00:00:00Z"}}, {"id": "10.1016/j.jaap.2018.11.026", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:54Z", "type": "Journal Article", "created": "2018-11-27", "title": "Influence of step duration in fractionated Py-GC/MS of lignocellulosic biomass", "description": "Fractionated pyrolysis coupled to gas chromatography and mass spectrometry (Py-GC/MS) appears as an interesting analytical tool for elucidating lignocellulosic biomass structure, as it allows the progressive release of chemical fragments representative of biomass macromolecular composition. In this paper the effect of fractionated pyrolysis time (from 5 s to 300 s) on the degradation of lignin and carbohydrates from beech wood was studied at temperatures between 250 \u00b0C and 500 \u00b0C. Fractionated Py-GC/MS showed that the release temperature of the volatile degradation products varied between the volatile species detected. In addition, the step duration time changed the thermal degradation behavior of lignocellulosic components. Shortening the constant step duration time from 300 s to 5 s shifted the maximum weight loss to the higher temperatures. The result was opposite at long step duration times. Time optimization at each pyrolysis temperature (250 \u00b0C, 40 s; 300 \u00b0C, 30 s; 350 \u00b0C, 25 s; 370 \u00b0C, 20 s; 400 \u00b0C, 15 s; 450 \u00b0C, 10 s; 500 \u00b0C, 5 s) enhanced the yield of both lignin and carbohydrate volatile pyrolysis degradation products. In addition, two multiple temperature maxima were shown for some lignin and carbohydrate derivatives. This behavior may be due to the two different pathways of formation and macromolecular origins of compounds in beech wood. At optimized conditions lignin derivatives having a 3-carbon side chain substituent had a maximum at lower temperature than that of lignin derivatives with a 1-carbon side chain substituent. That phenomenon follows the order of primary and secondary pyrolysis reactions. Similar behaviors were observed among the degradation products of hemicelluloses and cellulose. Degradation products of hemicelluloses were mainly released at lower temperatures than those of cellulose derivatives, which illustrates the lower thermal stability of hemicelluloses compared to cellulose.
", "keywords": ["Beech", "ta114", "[CHIM.GENI] Chemical Sciences/Chemical engineering", "[SPI.GPROC] Engineering Sciences [physics]/Chemical and Process Engineering", "Fractionated pyrolysis", "Carbohydrates", "0211 other engineering and technologies", "02 engineering and technology", "540", "Py-GC/MS", "Lignin", "7. Clean energy", "13. Climate action", "Thermal degradation", "0202 electrical engineering", " electronic engineering", " information engineering", "G\u00e9nie chimique", "SDG 7 - Affordable and Clean Energy", "G\u00e9nie des proc\u00e9d\u00e9s", "ta116", "ta215"]}, "links": [{"href": "https://oatao.univ-toulouse.fr/27243/1/GonzalezMartinez_27243.pdf"}, {"href": "https://doi.org/10.1016/j.jaap.2018.11.026"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Analytical%20and%20Applied%20Pyrolysis", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.jaap.2018.11.026", "name": "item", "description": "10.1016/j.jaap.2018.11.026", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.jaap.2018.11.026"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2019-01-01T00:00:00Z"}}, {"id": "10.1016/j.fcr.2021.108182", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:41Z", "type": "Journal Article", "created": "2021-05-25", "title": "Global sensitivity analysis of crop yield and transpiration from the FAO-AquaCrop model for dryland environments", "description": "Open AccessPeer reviewed", "keywords": ["2. Zero hunger", "570", "Yield", "0208 environmental biotechnology", "0207 environmental engineering", "02 engineering and technology", "15. Life on land", "630", "AquaCrop", "6. Clean water", "Transpiration", "Dryland", "13. Climate action", "Sensitivity analysis"]}, "links": [{"href": "https://eprints.soton.ac.uk/449637/1/AquaCrop_GSA_rev2.pdf"}, {"href": "https://eprints.soton.ac.uk/449637/2/Lu2021_AquaCrop_GSA.pdf"}, {"href": "https://doi.org/10.1016/j.fcr.2021.108182"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Field%20Crops%20Research", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.fcr.2021.108182", "name": "item", "description": "10.1016/j.fcr.2021.108182", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.fcr.2021.108182"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-07-01T00:00:00Z"}}, {"id": "10.1016/j.jafr.2023.100732", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:54Z", "type": "Journal Article", "created": "2023-08-07", "title": "Aeromycological studies in the crops of the main cereals: A systematic review", "description": "Open AccessLes \u00e9tudes a\u00e9romycologiques sur les cultures c\u00e9r\u00e9ali\u00e8res permettent de d\u00e9terminer la variation temporelle des agents pathog\u00e8nes des plantes affectant la culture et de d\u00e9terminer le moment appropri\u00e9 pour appliquer les fongicides. Cependant, ce sujet n'a pas \u00e9t\u00e9 syst\u00e9matiquement revu. L'objectif de ce travail \u00e9tait d'analyser syst\u00e9matiquement toutes les \u00e9tudes a\u00e9romycologiques r\u00e9alis\u00e9es sur le ma\u00efs, le bl\u00e9, le riz, l'avoine, l'orge, le seigle, le sorgho et le millet. Une recherche syst\u00e9matique a \u00e9t\u00e9 effectu\u00e9e dans Scopus depuis le d\u00e9but de la base de donn\u00e9es jusqu'au 1er ao\u00fbt 2022. Les crit\u00e8res d'inclusion \u00e9taient qu'il s'agissait d'\u00e9tudes a\u00e9romycologiques sur le bl\u00e9 ou le riz ou le ma\u00efs ou l'avoine ou le sorgho ou le seigle ou l'orge ou le millet et d'\u00e9tudes publi\u00e9es dans des revues \u00e0 comit\u00e9 de lecture index\u00e9es dans Journal Citation Reports et r\u00e9dig\u00e9es en anglais ou en espagnol. Quarante-trois \u00e9tudes (21 sur le bl\u00e9, 15 sur le riz, 5 sur le ma\u00efs, 1 sur le sorgho et 2 sur l'orge) r\u00e9pondant \u00e0 tous les crit\u00e8res d'\u00e9ligibilit\u00e9 ont \u00e9t\u00e9 incluses (une des \u00e9tudes sur le ma\u00efs a \u00e9galement \u00e9t\u00e9 men\u00e9e sur le bl\u00e9). Aucune \u00e9tude a\u00e9romycologique n'a \u00e9t\u00e9 trouv\u00e9e chez l'avoine, le seigle et le millet. Il a \u00e9t\u00e9 not\u00e9 que la plupart des recherches a\u00e9romycologiques ont \u00e9t\u00e9 men\u00e9es sur les cultures de bl\u00e9 et principalement dans les pays des Am\u00e9riques. De plus, les propagules fongiques sont principalement collect\u00e9es par des m\u00e9thodes non viables, en utilisant divers types de collecteurs. En g\u00e9n\u00e9ral, les \u00e9tudes visaient \u00e0 identifier un agent pathog\u00e8ne sp\u00e9cifique et non \u00e0 la diversit\u00e9 des agents pathog\u00e8nes qui peuvent \u00eatre trouv\u00e9s. La relation des champignons identifi\u00e9s avec les param\u00e8tres m\u00e9t\u00e9orologiques \u00e9tait variable dans les diff\u00e9rentes \u00e9tudes. Cette revue syst\u00e9matique permet de r\u00e9sumer les \u00e9tudes a\u00e9romycologiques qui ont \u00e9t\u00e9 men\u00e9es sur les cultures de bl\u00e9, de riz, de ma\u00efs, de sorgho et d'orge. Il sugg\u00e8re \u00e9galement o\u00f9 les futures \u00e9tudes dans ce domaine devraient \u00eatre dirig\u00e9es, en fonction des limites rencontr\u00e9es.", "keywords": ["Impacts of Elevated CO2 and Ozone on Plant Physiology", "Agriculture (General)", "Health", " Toxicology and Mutagenesis", "Plant Science", "Crop", "S1-972", "Agricultural and Biological Sciences", "Barley", "Biochemistry", " Genetics and Molecular Biology", "TX341-641", "10. No inequality", "Biology", "Sorghum", "2. Zero hunger", "Corn", "Airborne spores", "Nutrition. Foods and food supply", "Life Sciences", "Phylogenetic Analysis", "Cell Biology", "15. Life on land", "2414.06 Hongos", "Agronomy", "3. Good health", "Wheat", "Environmental Science", "Physical Sciences", "Rice", "Indoor Air Quality and Health Effects", "Diversity and Evolution of Fungal Pathogens", "Biotechnology"]}, "links": [{"href": "https://doi.org/10.1016/j.jafr.2023.100732"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Agriculture%20and%20Food%20Research", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.jafr.2023.100732", "name": "item", "description": "10.1016/j.jafr.2023.100732", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.jafr.2023.100732"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2023-12-01T00:00:00Z"}}, {"id": "10.1016/j.agee.2017.10.023", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:13Z", "type": "Journal Article", "created": "2017-11-07", "title": "Critical review of the impacts of grazing intensity on soil organic carbon storage and other soil quality indicators in extensively managed grasslands", "description": "Livestock grazing intensity (GI) is thought to have a major impact on soil organic carbon (SOC) storage and soil quality indicators in grassland agroecosystems. To critically investigate this, we conducted a global review and meta-analysis of 83 studies of extensive grazing, covering 164 sites across different countries and climatic zones. Unlike previous published reviews we normalized the SOC and total nitrogen (TN) data to a 30\u00a0cm depth to be compatible with IPCC guidelines. We also calculated a normalized GI and divided the data into four main groups depending on the regional climate (dry warm, DW; dry cool, DC; moist warm, MW; moist cool, MC). Our results show that taken across all climatic zones and GIs, grazing (below the carrying capacity of the systems) results in a decrease in SOC storage, although its impact on SOC is climate-dependent. When assessed for different regional climates, all GI levels increased SOC stocks under the MW climate (+7.6%) whilst there were reductions under the MC climate (-19%). Under the DW and DC climates, only the low (+5.8%) and low to medium (+16.1%) grazing intensities, respectively, were associated with increased SOC stocks. High GI significantly increased SOC for C4-dominated grassland compared to C3-dominated grassland and C3-C4 mixed grasslands. It was also associated with significant increases in TN and bulk density but had no effect on soil pH. To protect grassland soils from degradation, we recommend that GI and management practices should be optimized according to climate region and grassland type (C3, C4 or C3-C4 mixed).", "keywords": ["330", "QH301 Biology", "630", "Article", "QH301", "NE/M021327/1", "Grazing intensity", "SDG 13 - Climate Action", "grazing", "2. Zero hunger", "Soil organic carbon", "Natural Environment Research Council (NERC)", "NE/P019455/1", "04 agricultural and veterinary sciences", "15. Life on land", "Grassland", "soil organic carbon", "Grazing", "grazing intensity", "total nitrogen", "13. Climate action", "NE/M016900/1", "NE/M019713/1", "Biotechnology and Biological Sciences Research Council (BBSRC)", "0401 agriculture", " forestry", " and fisheries", "BB/N013484/1", "grassland", "BB/N013468/1"]}, "links": [{"href": "https://doi.org/10.1016/j.agee.2017.10.023"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Agriculture%2C%20Ecosystems%20%26amp%3B%20Environment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.agee.2017.10.023", "name": "item", "description": "10.1016/j.agee.2017.10.023", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.agee.2017.10.023"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2018-02-01T00:00:00Z"}}, {"id": "10.1016/j.apenergy.2013.05.017", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:18Z", "type": "Journal Article", "created": "2013-07-03", "title": "Energy And Climate Benefits Of Bioelectricity From Low-Input Short Rotation Woody Crops On Agricultural Land Over A Two-Year Rotation", "description": "AbstractShort-rotation woody crops (SRWCs) are a promising means to enhance the EU renewable energy sources while mitigating greenhouse gas (GHG) emissions. However, there are concerns that the GHG mitigation potential of bioelectricity may be nullified due to GHG emissions from direct land use changes (dLUCs). In order to evaluate quantitatively the GHG mitigation potential of bioelectricity from SRWC we managed an operational SRWC plantation (18.4ha) for bioelectricity production on a former agricultural land without supplemental irrigation or fertilization. We traced back to the primary energy level all farm labor, materials, and fossil fuel inputs to the bioelectricity production. We also sampled soil carbon and monitored fluxes of GHGs between the SRWC plantation and the atmosphere. We found that bioelectricity from SRWCs was energy efficient and yielded 200\u2013227% more energy than required to produce it over a two-year rotation. The associated land requirement was 0.9m2kWhe-1 for the gasification and 1.1m2kWhe-1 for the combustion technology. Converting agricultural land into the SRWC plantation released 2.8 \u00b1 0.2tCO2eha\u22121, which represented \u223c89% of the total GHG emissions (256\u2013272gCO2ekWhe-1) of bioelectricity production. Despite its high share of the total GHG emissions, dLUC did not negate the GHG benefits of bioelectricity. Indeed, the GHG savings of bioelectricity relative to the EU non-renewable grid mix power ranged between 52% and 54%. SRWC on agricultural lands with low soil organic carbon stocks are encouraging prospects for sustainable production of renewable energy with significant climate benefits.", "keywords": ["2. Zero hunger", "Physics", "0211 other engineering and technologies", "Eddy fluxes", "02 engineering and technology", "15. Life on land", "7. Clean energy", "12. Responsible consumption", "GHG emissions", "Life cycle assessment", "Energy(all)", "13. Climate action", "Direct land use change", "11. Sustainability", "0202 electrical engineering", " electronic engineering", " information engineering", "Energy ratio", "Biology", "Engineering sciences. Technology", "Civil and Structural Engineering"]}, "links": [{"href": "https://doi.org/10.1016/j.apenergy.2013.05.017"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Applied%20Energy", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.apenergy.2013.05.017", "name": "item", "description": "10.1016/j.apenergy.2013.05.017", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.apenergy.2013.05.017"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2013-11-01T00:00:00Z"}}, {"id": "10.1016/j.enggeo.2020.105977", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:36Z", "type": "Journal Article", "created": "2020-12-17", "title": "Chasing a complete understanding of the failure mechanisms and potential hazards of the slow moving Liangshuijing landslide", "description": "Abstract Landslides in the vicinity of reservoirs are prone to generate deadly waves as in the infamous Vajont case. There are more than 3800 landslides in the Three Gorges Reservoir area through detailed geological investigations, which constitutes a serious tsunami threat to the population and properties nearby. The Liangshuijing landslide, a very large creeping landslide located in the region and characterized by a complex morphology of multiple time varying failure mechanisms, is here investigated. Currently comprehensive measurements taken by ground monitoring network, inclinometric readings, in situ and laboratory geotechnical tests were analyzed to build a conceptual model for the landslide's drivers and its kinematics. The cumulative displacement time series were decomposed into trend and periodic components to reliably establish the relationship between displacements and reservoir behavior. A series of numerical slope stability analyses employing finite element limit analysis was performed to identify the material properties compatible with the observed landslide kinematics. Our results shed light on how reservoir behaviors drive landslide development, on how the identified failure mechanisms affect the observed terrain displacements and on which failure mechanism turns out to be dominant as reservoir conditions change. Our findings provide new insight for hazard assessment and mitigation of landslides near reservoirs: considerably smaller local failure mechanisms may cause a tsunami almost severe. Therefore, a single stability analysis may not be adequate but a full suite of analyses probing the range of possible conditions is required.", "keywords": ["13. Climate action", "0211 other engineering and technologies", "02 engineering and technology", "01 natural sciences", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://eprints.ncl.ac.uk/fulltext.aspx?url=272370/603EED53-C3B0-401D-B2B4-66882CFB163A.pdf&pub_id=272370"}, {"href": "https://doi.org/10.1016/j.enggeo.2020.105977"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Engineering%20Geology", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.enggeo.2020.105977", "name": "item", "description": "10.1016/j.enggeo.2020.105977", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.enggeo.2020.105977"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-02-01T00:00:00Z"}}, {"id": "10.1016/j.combustflame.2019.11.001", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:29Z", "type": "Journal Article", "created": "2020-01-24", "title": "Influence of soil conditions on the multidimensional spread of smouldering combustion in shallow layers", "description": "Abstract Smouldering peatland fires are capable of burning vast amounts of organic soils, resulting in the release of greenhouse gases into the atmosphere, as well as a significant deterioration of air quality causing in major regional crises known as haze events. Fundamental understanding of smouldering fire spread is essential for the development of mitigating technologies. In this paper, we have systematically conducted 63 experiments studying the individual and combined influence of two key factors affecting multidimensional smouldering spread in organic soils: moisture content (MC) and inorganic content (IC). Both lateral and in-depth smouldering spread were investigated using a novel shallow reactor. This shallow depth allows a greater number of experiments to be performed in a short period of time compared to deeper samples. Lateral spread was found to decrease linearly with moisture content (R2 > 90%); while in-depth spread rate increased linearly up to 300% from moisture content of 0% to 140%. Increased inorganic content linearly decreased the lateral spread rate but had little influence on in-depth spread in drier samples. Interestingly, in wetter samples, in-depth spread was in fact sensitive to inorganic content. A novel approach combining lateral and in-depth spread rates as vector components, revealed that the global spread is independent of moisture content, with an average spread rate of 8.7 and 8.4\u00a0cm/h for 2.5 and 40% IC, with changes in direction according to moisture content; going in-depth for wet soils, and laterally for dry soils. Similarly, increasing the IC encouraged downward spread for wet samples. We also report observations of a bifurcation of lateral spread, where spread would locally extinguish where the in-depth spread was greater than the lateral spread. These findings provide previously unknown insight into the relationship between lateral and in-depth spread in smouldering fires, ultimately improving the fundamental understanding of such fires.", "keywords": ["Technology", "Engineering", " Chemical", "Energy & Fuels", "0904 Chemical Engineering", "Engineering", " Multidisciplinary", "TRANSIENT GAS", "Chemical", "02 engineering and technology", "Wildfire", "MOISTURE", "0902 Automotive Engineering", "01 natural sciences", "0201 civil engineering", "Engineering", "Smouldering", "Heat transfer", "Biomass", "PEAT FIRES", "0105 earth and related environmental sciences", "Multidisciplinary", "Science & Technology", "Energy", "CONSUMPTION", "15. Life on land", "Mechanical", "Fire", "Engineering", " Mechanical", "IGNITION", "13. Climate action", "Physical Sciences", "PARTICLE EMISSIONS", "Thermodynamics", "0913 Mechanical Engineering"], "contacts": [{"organization": "Christensen, EG, Fernandez-Anez, N, Rein, G,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1016/j.combustflame.2019.11.001"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Combustion%20and%20Flame", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.combustflame.2019.11.001", "name": "item", "description": "10.1016/j.combustflame.2019.11.001", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.combustflame.2019.11.001"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2020-04-01T00:00:00Z"}}, {"id": "10.1016/j.jare.2020.02.015", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:54Z", "type": "Journal Article", "created": "2020-02-26", "title": "From winery waste to bioactive compounds and new polymeric biocomposites: A contribution to the circular economy concept", "description": "The paper aims at optimising and validating possible routes toward the full valorisation of grape agrowaste to produce bioactive molecules and new materials. Starting from Merlot red pomace, phenol complex mixtures were successfully extracted by using two different approaches. Extracts obtained by solvent-based (SE) technique contained up to 46.9 gGAeq/kgDW of total phenols. Depending on the used solvent, the prevalence of compounds belonging to different phenol families was achieved. Pressurized liquid extraction (PLE) gave higher total phenol yields (up to 79 gGAeq/kgDW) but a lower range of extracted compounds. All liquid extracts exerted strong antioxidant properties. Moreover, both SE and PLE extraction solid residues were directly exploited (between 5 and 20% w/w) to prepare biocomposite materials by direct mixing via an eco-friendly approach with PHBV polymer. The final composites showed mechanical characteristics similar to PHVB matrix. The use of pomace residues in biocomposites could therefore bring both to the reduction of the cost of the final material, as a lower amount of costly PHBV is used. The present research demonstrated the full valorisation of grape pomace, an agrowaste produced every year in large amounts and having a significant environmental impact.", "keywords": ["Medicine (General)", "Biocomposites", "Science (General)", "Agricultural Sciences", "Polyphenols", "Solvent-based extraction", "Biowaste", "04 agricultural and veterinary sciences", "Agriculture Forestry and Fisheries", "Grape pomace", "Biocomposites; Biowaste; Grape pomace; Polyphenols; Solvent-based extraction", " Pressurized liquid extraction", "01 natural sciences", "Article", "12. Responsible consumption", "Q1-390", "R5-920", "0404 agricultural biotechnology", "Pressurized liquid extraction", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://cris.unibo.it/bitstream/11585/758289/1/Ferri%20et%20al%202020%20JARE%20.pdf"}, {"href": "https://doi.org/10.1016/j.jare.2020.02.015"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Advanced%20Research", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.jare.2020.02.015", "name": "item", "description": "10.1016/j.jare.2020.02.015", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.jare.2020.02.015"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2020-07-01T00:00:00Z"}}, {"id": "10.1016/j.agwat.2022.107602", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:17Z", "type": "Journal Article", "created": "2022-04-01", "title": "A novel evapotranspiration based irrigation quantification method using the hydrological similar pixels algorithm", "description": "Globally, the agricultural sector is the largest consumer of fresh water, despite the increased efficiency in irrigation. Remote sensing is a valuable tool to monitor agricultural water use. In this study, we demonstrate a novel algorithm that computes high-resolution (10 m) remote sensing-based evapotranspiration (ET) data linked exclusively to irrigation, i.e. the incremental evapotranspiration (ETincr). The methodology compares the ET of irrigated agricultural pixels to the weighted average ET of a subset of natural Hydrological Similar Pixels (HSP). The hydrological similarity is based upon a set of features derived from DEM, soil texture, reference evapotranspiration, and precipitation datasets. The difference in ET between the subset of hydrological similar natural pixels and the corresponding irrigated agricultural pixel is explanatory for the amount of ET related to irrigation (ETincr). These results are then converted to the water use (m3) per agricultural field. The method is validated for three study areas in South Africa, Spain, and Australia. Comparing the monthly and seasonal water use estimates to water meter observations in the Hex Valley (South Africa), yielded an R2 of 0.751 and 0.780, respectively. For the Ebro (Spain) and Namoi (Australia) study areas, the accuracy of the monthly estimates decreased. In Australia, this was a result of the water meters being linked to local reservoirs, instead of the direct use of the irrigation systems. In total, 8 out of the 27 validation fields with monthly data showed a Kling-Gupta Efficiency (KGE) larger than 0.5, which highlights that the temporal variability can be captured well by the model. Generally, seasonal estimates showed to be most accurate, which makes the product suitable for comparison with seasonal water allocations and could help to monitor overconsumption in water-scarce environments.", "keywords": ["2. Zero hunger", "Hydrological Similar Pixels", "550", "0208 environmental biotechnology", "[SDU.STU.HY] Sciences of the Universe [physics]/Earth Sciences/Hydrology", "0207 environmental engineering", "02 engineering and technology", "[SDU.STU.HY]Sciences of the Universe [physics]/Earth Sciences/Hydrology", "15. Life on land", "333", "630", "ETLook", "6. Clean water"]}, "links": [{"href": "https://doi.org/10.1016/j.agwat.2022.107602"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Agricultural%20Water%20Management", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.agwat.2022.107602", "name": "item", "description": "10.1016/j.agwat.2022.107602", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.agwat.2022.107602"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2022-06-01T00:00:00Z"}}, {"id": "10.1088/1742-6596/1618/4/042019", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:17:12Z", "type": "Journal Article", "created": "2020-09-22", "title": "A method to reduce model uncertainty by fusing the output from multiple stochastic simulators", "description": "Open AccessJournal of Physics: Conference Series, 1618 (042019)", "keywords": ["0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "0101 mathematics", "7. Clean energy", "01 natural sciences"]}, "links": [{"href": "https://doi.org/10.1088/1742-6596/1618/4/042019"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Physics%3A%20Conference%20Series", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1088/1742-6596/1618/4/042019", "name": "item", "description": "10.1088/1742-6596/1618/4/042019", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1088/1742-6596/1618/4/042019"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2020-09-01T00:00:00Z"}}, {"id": "10.1016/j.envint.2019.03.060", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:37Z", "type": "Journal Article", "created": "2019-04-05", "title": "Characterization of wastewater effluents in the Danube River Basin with chemical screening, in vitro bioassays and antibiotic resistant genes analysis", "description": "Averaged 7-day composite effluent wastewater samples from twelve wastewater treatment plants (WWTPs) in nine countries (Romania, Serbia, Hungary, Slovenia, Croatia, Slovakia, Czechia, Austria, Germany) in the Danube River Basin were collected. WWTPs' selection was based on countries' dominant technology and a number of served population with the aim to get a representative holistic view of the pollution status. Samples were analyzed for 2248 chemicals of emerging concern (CECs) by wide-scope target screening employing LC-ESI-QTOF-MS. 280 compounds were detected at least in one sample and quantified. Spatial differences in the concentrations and distribution of the compounds classes were discussed. Additionally, samples were analyzed for the possible agonistic/antagonistic potencies using a panel of in vitro transactivation reporter gene CALUX\u00ae bioassays including ER\u03b1 (estrogenics), anti-AR (anti-androgens), GR (glucocorticoids), anti-PR (anti-progestins), PPAR\u03b1 and PPAR\u03b3 (peroxisome proliferators) and PAH assays. The potency of the wastewater samples to cause oxidative stress and induce xenobiotic metabolism was determined using the Nrf2 and PXR CALUX\u00ae bioassays, respectively. The signals from each of the bioassays were compared with the recently developed effect-based trigger values (EBTs) and thus allowed for allocating the wastewater effluents into four categories based on their measured toxicity, proposing a putative action plan for wastewater operators. Moreover, samples were analyzed for antibiotics and 13 antibiotic-resistant genes (ARGs) and one mobile genetic element (intl1) with the aim to assess the potential for antibiotic resistance. All data collected from these various types of analysis were stored in an on-line database and can be viewed via interactive map at https://norman-data.eu/EWW_DANUBE.", "keywords": ["0211 other engineering and technologies", "500", "Drug Resistance", " Microbial", "02 engineering and technology", "Wide-scope target screening", "Wastewater", "01 natural sciences", "Bioassays", "6. Clean water", "Anti-Bacterial Agents", "Environmental sciences", "Rivers", "13. Climate action", "Emerging substances", "Antibiotic resistant genes", "Effluent wastewater", "GE1-350", "Biological Assay", "Danube River Basin", "Emerging substances Wide-scope target screening Effluent wastewater Bioassays Antibiotic resistant genes Danube River Basin", "Water Pollutants", " Chemical", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.envint.2019.03.060"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Environment%20International", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.envint.2019.03.060", "name": "item", "description": "10.1016/j.envint.2019.03.060", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.envint.2019.03.060"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2019-06-01T00:00:00Z"}}, {"id": "10.1016/j.biombioe.2011.04.041", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:23Z", "type": "Journal Article", "created": "2011-06-28", "title": "How To Ensure Greenhouse Gas Emission Reductions By Increasing The Use Of Biofuels? \u2013 Suitability Of The European Union Sustainability Criteria", "description": "Biofuels are promoted in many parts of the world. However, concern of environmental and social problems have grown due to increased production of biofuels. Therefore, many initiatives for sustainability criteria have been announced. As a part of the European Union (EU) renewable energy promotion directive (RED), the EU has introduced greenhouse gas (GHG) emission-saving requirements for biofuels along with the first-ever mandate methodology to calculate the GHG emission reduction. As explored in this paper, the RED methodology, based on life-cycle assessment (LCA) approach, excludes many critical issues. These include indirect impacts due to competition for land, biomass and other auxiliary inputs. Also, timing issues, allocation problems, and uncertainty of individual parameters are not yet considered adequately. Moreover, the default values provided in the RED for the GHG balances of biofuels may significantly underestimate their actual impacts. We conclude that the RED methodology cannot ensure the intended GHG emission reductions of biofuels. Instead, a more comprehensive approach is required along with additional data and indicators. Even if it may be very difficult to verify the GHG emission reductions of biofuels in practice, it is necessary to consider the uncertainties more closely, in order to mitigate climate change effectively.", "keywords": ["life-cycle assessment", "criteria", "02 engineering and technology", "sustainability", "16. Peace & justice", "7. Clean energy", "01 natural sciences", "12. Responsible consumption", "greenhouse gas emission", "Biofuel", "13. Climate action", "11. Sustainability", "and Infrastructure", "SDG 13 - Climate Action", "0202 electrical engineering", " electronic engineering", " information engineering", "SDG 7 - Affordable and Clean Energy", "Innovation", "SDG 12 - Responsible Consumption and Production", "SDG 9 - Industry", "ta218", "0105 earth and related environmental sciences"], "contacts": [{"organization": "Koponen, Kati, Soimakallio, Sampo,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1016/j.biombioe.2011.04.041"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Biomass%20and%20Bioenergy", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.biombioe.2011.04.041", "name": "item", "description": "10.1016/j.biombioe.2011.04.041", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.biombioe.2011.04.041"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2011-08-01T00:00:00Z"}}, {"id": "10.1016/j.geoderma.2017.10.020", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:51Z", "type": "Journal Article", "created": "2017-11-06", "title": "Characterising and linking X-ray CT derived macroporosity parameters to infiltration in soils with contrasting structures", "description": "Soils deliver the regulating ecosystem services of water infiltration and distribution, which can be controlled by macropores. Parameterizing macropore hydraulic properties is challenging due to the lack of direct measurement methods. With tension-disc infiltrometry hydraulic properties near saturation can be measured. Differentiating between hydrologically active and non-active pores, at a given water potential, indirectly assesses macropore continuity. Water flow through macropores is controlled by macropore size distribution, tortuosity, and connectivity, which can be directly derived by X-ray computed tomography (CT). Our objective was to parameterize macropore hydraulic properties based on the imaged macropore network of three horizons of an Andosol and a Gleysol. Hydraulic conductivity K unsat was derived from infiltration measurements. Soil cores from the infiltration areas were scanned with X-ray CT. K unsat was significantly higher in the Andosol than in the Gleysol at all water potentials, and decreased significantly with depth in both soils. The in situ measurements guided the definition of new macroporosity parameters from the X-ray CT reconstructions. For the Andosol, K unsat was best predicted using the imaged-limited macroporosity. A low total macroporosity, coupled with a high macropore density, indicated the abundance of smaller macropores, leading to homogeneous matrix flux. Imaged macropores were not well connected. In contrast, the Gleysol had a bi-modal macropore system with few very large, but well-connected macropores. K unsat was best predicted using the imaged macroporosity consisting only of macropores with diameters between 0.75 and 3 mm. Our research demonstrates that linking traditional soil physical measurements with soil-visualization techniques has a huge potential to improve parameterizing macropore hydraulic properties. The relevance of the relationships found in this study for larger scales and other soil types still needs to be tested, for example by a multi-scale investigation including a much wider range of different soils.
", "keywords": ["[SDE] Environmental Sciences", "Hydraulic parameters", "0207 environmental engineering", "04 agricultural and veterinary sciences", "02 engineering and technology", "15. Life on land", "6. Clean water", "Image analysis", "Tension disc in\ufb01ltrometr", "Tension disc infiltrometry", "Pore network", "13. Climate action", "Soil structure", "[SDE.ES] Environmental Sciences/Environment and Society", "0401 agriculture", " forestry", " and fisheries"]}, "links": [{"href": "https://doi.org/10.1016/j.geoderma.2017.10.020"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Geoderma", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.geoderma.2017.10.020", "name": "item", "description": "10.1016/j.geoderma.2017.10.020", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.geoderma.2017.10.020"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2018-03-01T00:00:00Z"}}, {"id": "10.1007/s11367-012-0500-1", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:59Z", "type": "Journal Article", "created": "2012-09-19", "title": "Life Cycle Assessment In Green Chemistry: Overview Of Key Parameters And Methodological Concerns", "description": "Several articles within the area of green chemistry often promote new techniques or products as \u2018green\u2019 or \u2018more environmentally benign\u2019 than their conventional counterpart although these articles often do not quantitatively assess the environmental performance. In order to do this, life cycle assessment (LCA) is a valuable methodology. However, on the planning stage, a full-scale LCA is considered to be too time consuming and complicated. Two reasons for this have been recognised, the method is too comprehensive and it is hard to find inventory data. In this review, key parameters are presented with the purpose to reduce the time-consuming steps in LCA. In this review, several LCAs of so-called \u2018green chemicals\u2019 are analysed and key parameters and methodological concerns are identified. Further, some conclusions on the environmental performance of chemicals were drawn. For fossil-based platform chemicals several LCAs exists but for chemicals produced with industrial biotechnology or from renewable resources the number of LCAs is limited, with the exception of biofuels, for which a large number of studies are made. In the review, a significant difference in the environmental performance of bulk and fine chemicals was identified. The environmental performance of bulk chemicals are closely connected to the production of the raw material and thereby different land use aspects. Here, a lot can be learnt from biofuel LCAs. In many of the reviewed articles focusing on bulk chemicals a comparison regarding fossil and renewable raw material was done. In most of the comparisons the renewable alternative turned out to be more environmentally preferable, especially for the impact on GWP and energy use. However, some environmental concerns were identified as important to include to assess overall environmental concern, for example eutrophication and the use of land. To assess the environmental performance of green chemicals, quantitative methods are needed. For this purpose, both simple metrics and more comprehensive methods have been developed, one recognised method being LCA. However, this method is often too time consuming to be valuable in the process planning stage. This is partly due to a lack of available inventory data, but also because the method itself is too comprehensive. Here, key parameters for the environmental performance and methodological concerns were described to facilitate a faster and simpler use of LCA of green chemicals in the future.", "keywords": ["13. Climate action", "11. Sustainability", "0211 other engineering and technologies", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "7. Clean energy", "6. Clean water", "12. Responsible consumption"]}, "links": [{"href": "https://doi.org/10.1007/s11367-012-0500-1"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/The%20International%20Journal%20of%20Life%20Cycle%20Assessment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1007/s11367-012-0500-1", "name": "item", "description": "10.1007/s11367-012-0500-1", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1007/s11367-012-0500-1"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2012-09-20T00:00:00Z"}}, {"id": "10.1007/s11367-012-0512-x", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:59Z", "type": "Journal Article", "created": "2012-10-09", "title": "Life-Cycle Climate Impacts Of Peat Fuel: Calculation Methods And Methodological Challenges", "description": "There has been lively debate, especially in Finland and Sweden, on the climate impacts of peat fuel. Previous studies of peat fuel's life-cycle climate impacts were controversial in their interpretation. The aim of this paper is conclusive examination of the issues of LCA methodology, derived from critical review of previous studies and recalculation based on the latest knowledge of greenhouse gas balances related to peat fuel\u2019s utilisation and the radiative forcing impacts of greenhouse gases. The most recent findings on emissions and the gas fluxes between soil, vegetation and atmosphere were used in calculation of the life-cycle climate impacts of the various peat fuel utilisation chains by means of LCA methodology. In the main, the calculation methods and rules were the same as in the previous studies, with the aim being to distinguish the impact of peat fuel\u2019s utilisation from that of the natural or semi-natural situation. A dynamic method was employed for assessing changes in radiative forcing. The results of alternative peat fuel utilisation chains were compared to the corresponding result for coal. There are many steps in peat fuel LCA, where different assumptions lead to different outcomes. Determining the functional unit, reference situations and system boundaries, as well as the emission calculation methods, is important from this point of view. Determination of the initial reference situation emerged as one of the critical points in the calculations. Time scale can strongly affect the final outcomes in a study where effects of long-term land-use change are considered. Each peatland area is unique. The higher the greenhouse gas emissions in the initial reference situation, the greater is the climate impact of the area and the more suitable the area is for peat extraction. The study showed that more greenhouse gas flux measurements are needed, for better assessment of the climate impacts of different potential peat extraction sites. Climate change mitigation requires quick actions, and uncertainties related to emissions are higher for longer time spans. Therefore, it can be concluded that a perspective spanning more than 100\u00a0years is inappropriate in peat fuel's life-cycle climate impact assessments.", "keywords": ["13. Climate action", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "15. Life on land", "7. Clean energy", "12. Responsible consumption"]}, "links": [{"href": "https://doi.org/10.1007/s11367-012-0512-x"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/The%20International%20Journal%20of%20Life%20Cycle%20Assessment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1007/s11367-012-0512-x", "name": "item", "description": "10.1007/s11367-012-0512-x", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1007/s11367-012-0512-x"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2012-10-10T00:00:00Z"}}, {"id": "10.1016/j.scitotenv.2014.11.004", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:16:06Z", "type": "Journal Article", "created": "2014-11-20", "title": "Impacts Of Lucc On Soil Properties In The Riparian Zones Of Desert Oasis With Remote Sensing Data: A Case Study Of The Middle Heihe River Basin, China", "description": "Large-scale changes in land use and land cover over long timescales can induce significant variations in soil physicochemical properties, particularly in the riparian zones of arid regions. Frequent reclamation of wetlands and grasslands and intensive agricultural activity have induced significant changes in both land use/cover and soil physicochemical properties in the riparian zones of the middle Heihe River basin of China. The present study aims to explore whether land use/land cover change (LUCC) can well explain the variations in soil properties in the riparian zones of the middle Heihe River basin. To achieve this, we mapped LUCC and quantified the type of land use change using remote sensing images, topographic maps, and GIS analysis techniques. Forty-two sites were selected for soil and vegetation sampling. Then, physical and chemical experiments were employed to determine soil moisture, soil bulk density, soil pH, soil organic carbon, total nitrogen, total potassium, total phosphorous, available nitrogen, available potassium, and available phosphorous. The Independent-Samples Kruskal-Wallis Test, principal component analysis, and a scatter matrix were used to analyze the effects of LUCC on soil properties. The results indicate that the majority of the parameters investigated were affected significantly by LUCC. In particular, soil moisture and soil organic carbon can be explained well by land cover change and land use change, respectively. Furthermore, changes in soil moisture could be attributed primarily to land cover changes. Changes in soil organic carbon were correlated closely with the following land use change types: wetlands-arable, forest-grasslands, and grasslands-desert. Other parameters, including pH and total K, were also found to exhibit significant correlations with LUCC. However, changes in soil nutrients were shown to be induced most probably by human agricultural activity (i.e. fertilize, irrigation, tillage, etc.), rather than by simple conversions from one land use/cover types to the others.", "keywords": ["2. Zero hunger", "China", "Conservation of Natural Resources", "Nitrogen", "Urbanization", "Agriculture", "Phosphorus", "04 agricultural and veterinary sciences", "Environment", "15. Life on land", "01 natural sciences", "6. Clean water", "3. Good health", "Soil", "Rivers", "13. Climate action", "Remote Sensing Technology", "0401 agriculture", " forestry", " and fisheries", "Desert Climate", "Ecosystem", "Environmental Monitoring", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.scitotenv.2014.11.004"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Science%20of%20The%20Total%20Environment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.scitotenv.2014.11.004", "name": "item", "description": "10.1016/j.scitotenv.2014.11.004", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.scitotenv.2014.11.004"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2015-02-01T00:00:00Z"}}, {"id": "10.1016/j.scitotenv.2018.11.010", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:16:07Z", "type": "Journal Article", "created": "2018-11-03", "title": "\u03b415N of lichens reflects the isotopic signature of ammonia source", "description": "Although it is generally accepted that \u03b415N in lichen reflects predominating N isotope sources in the environment, confirmation of the direct correlation between lichen \u03b415N and atmospheric \u03b415N is still missing, especially under field conditions with most confounding factors controlled. To fill this gap and investigate the response of lichens with different tolerance to atmospheric N deposition, thalli of the sensitive Evernia prunastri and the tolerant Xanthoria parietina were exposed for ten weeks to different forms and doses of N in a field manipulation experiment where confounding factors were minimized. During this period, several parameters, namely total N, \u03b415N and chlorophyll a fluorescence, were measured. Under the experimental conditions, \u03b415N in lichens quantitatively responded to the \u03b415N of released gaseous ammonia (NH3). Although a high correlation between the isotopic signatures in lichen tissue and supplied N was found both in tolerant and sensitive species, chlorophyll a fluorescence indicated that the sensitive species very soon lost its photosynthetic functionality with increasing N availability. The most damaging response to the different N chemical forms was observed with dry deposition of NH3, although wet deposition of ammonium ions had a significant observable physiological impact. Conversely, there was no significant effect of nitrate ions on chlorophyll a fluorescence, implying differential sensitivity to dry deposition versus wet deposition and to ammonium versus nitrate in wet deposition. Evernia prunastri was most sensitive to NH3, then NH4+, with lowest sensitivity to NO3-. Moreover, these results confirm that lichen \u03b415N can be used to indicate the \u03b415N of atmospheric ammonia, providing a suitable tool for the interpretation of the spatial distribution of NH3 sources in relation to their \u03b415N signal.", "keywords": ["Air Pollutants", "Nitrates", "Lichens", "Nitrogen Isotopes", "Chlorophyll A", "0211 other engineering and technologies", "02 engineering and technology", "Models", " Theoretical", "chlorophyll a fluorescence", "01 natural sciences", "nitrogen deposition", "Xanthoria parietina", "Species Specificity", "Ammonia", "13. Climate action", "source spatial distribution", "biomonitoring", "physiological response", "Photosynthesis", "Environmental Monitoring", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.scitotenv.2018.11.010"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Science%20of%20The%20Total%20Environment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.scitotenv.2018.11.010", "name": "item", "description": "10.1016/j.scitotenv.2018.11.010", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.scitotenv.2018.11.010"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2019-02-01T00:00:00Z"}}, {"id": "10.1016/j.scitotenv.2020.142653", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:16:08Z", "type": "Journal Article", "created": "2020-10-01", "title": "Low density-microplastics detected in sheep faeces and soil: A case study from the intensive vegetable farming in Southeast Spain", "description": "<p>One of the main sources of plastic pollution in agricultural fields is the plastic mulch used by farmers to improve crop production. The plastic mulch is often not removed completely from the fields after harvest. Over time, the plastic mulch that is left of the fields is broken down into smaller particles which are dispersed by the wind or runoff. In the Region of Murcia in Spain, plastic mulch is heavily used for intensive vegetable farming. After harvest, sheep are released into the fields to graze on the vegetable residues. The objective of the study was to assess the plastic contamination in agricultural soil in Spain and the ingestion of plastic by sheep. Therefore, three research questions were established: i) What is the plastic content in agricultural soils where plastic mulch is commonly used? ii) Do livestock ingest the microplastics found in the soil? iii) How much plastic could be transported by the livestock? To answer these questions, we sampled top soils (0&#8211;10&#160;cm) from 6 vegetable fields and collected sheep faeces from 5 different herds. The microplastic content was measured using density separation and visual identification. We found ~2&#160;&#215;&#160;10<sup>3</sup> particles&#8729;kg<sup>&#8722;1</sup> in the soil and ~10<sup>3</sup> particles&#8729;kg<sup>&#8722;1</sup> in the faeces. The data show that plastic particles were present in the soil and that livestock ingested them. After ingesting plastic from one field, the sheep can become a source of microplastic contamination as they graze on other farms or grasslands. The potential transport of microplastics due to a herd of 1000 sheep was estimated to be ~10<sup>6</sup> particles&#8729;ha<sup>&#8722;1</sup>&#8729;y<sup>&#8722;1</sup>. Further studies should focus on: assessing how much of the plastic found in faeces comes directly from plastic mulching, estimating the plastic degradation in the guts of sheep and understanding the potential effects of these plastic residues on the health of livestock.</p>
", "keywords": ["2. Zero hunger", "Livestock", "Farms", "Sheep", "Plastic residues", "Microplastics", "0211 other engineering and technologies", "Agriculture", "02 engineering and technology", "15. Life on land", "Terrestrial food chain transfer", "01 natural sciences", "Feces", "Soil", "Spain", "Vegetables", "Animals", "Plastics", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.scitotenv.2020.142653"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Science%20of%20The%20Total%20Environment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.scitotenv.2020.142653", "name": "item", "description": "10.1016/j.scitotenv.2020.142653", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.scitotenv.2020.142653"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-02-01T00:00:00Z"}}, {"id": "10.1016/j.scitotenv.2020.143726", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:16:08Z", "type": "Journal Article", "created": "2020-11-24", "title": "A systematic comparison of commercially produced struvite: Quantities, qualities and soil-maize phosphorus availability", "description": "Production of struvite (MgNH4PO4\u00b76H2O) from waste streams is increasingly implemented to recover phosphorus (P), which is listed as a critical raw material in the European Union (EU). To facilitate EU-wide trade of P-containing secondary raw materials such as struvite, the EU issued a revised fertilizer regulation in 2019. A comprehensive overview of the supply of struvite and its quality is presently missing. This study aimed: i) to determine the current EU struvite production volumes, ii) to evaluate all legislated physicochemical characteristics and pathogen content of European struvite against newly set regulatory limits, and iii) to compare not-regulated struvite characteristics. It is estimated that in 2020, between 990 and 1250 ton P are recovered as struvite in the EU. Struvite from 24 European production plants, accounting for 30% of the 80 struvite installations worldwide was sampled. Three samples failed the physicochemical legal limits; one had a P content of <7% and three exceeded the organic carbon content of 3% dry weight (DW). Mineralogical analysis revealed that six samples had a struvite content of 80-90% DW, and 13 samples a content of >90% DW. All samples showed a heavy metal content below the legal limits. Microbiological analyses indicated that struvite may exceed certain legal limits. Differences in morphology and particle size distribution were observed for struvite sourced from digestate (rod shaped; transparent; 82 mass%\u202f<\u202f1\u202fmm), dewatering liquor (spherical; opaque; 65 mass% 1-2\u202fmm) and effluent from upflow anaerobic sludge blanket reactor processing potato wastewater (spherical; opaque; 51 mass%\u202f<\u202f1\u202fmm and 34 mass%\u202f>\u202f2\u202fmm). A uniform soil-plant P-availability pattern of 3.5-6.5\u202fmg P/L soil/d over a 28\u202fdays sampling period was observed. No differences for plant biomass yield were observed. In conclusion, the results highlight the suitability of most struvite to enter the EU fertilizer market.", "keywords": ["2. Zero hunger", "Struvite", "0211 other engineering and technologies", "Magnesium Compounds", "Phosphorus", "02 engineering and technology", "Zea mays", "01 natural sciences", "6. Clean water", "Phosphates", "12. Responsible consumption", "Chemistry", "Soil", "Bio-based fertilizers; Circular economy; Magnesium ammonium phosphate; Nutrient recovery; Phosphorus recovery; Struvite characterization; Magnesium Compounds; Phosphates; Soil; Struvite; Phosphorus; Zea mays", "Biology", "Engineering sciences. Technology", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://arpi.unipi.it/bitstream/11568/1138036/1/STOTEN_struvite.pdf"}, {"href": "https://doi.org/10.1016/j.scitotenv.2020.143726"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Science%20of%20The%20Total%20Environment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.scitotenv.2020.143726", "name": "item", "description": "10.1016/j.scitotenv.2020.143726", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.scitotenv.2020.143726"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-02-01T00:00:00Z"}}, {"id": "10.1021/es303829w", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:16:34Z", "type": "Journal Article", "created": "2012-12-21", "title": "Can Dispersed Biomass Processing Protect The Environment And Cover The Bottom Line For Biofuel?", "description": "This paper compares environmental and profitability outcomes for a centralized biorefinery for cellulosic ethanol that does all processing versus a biorefinery linked to a decentralized array of local depots that pretreat biomass into concentrated briquettes. The analysis uses a spatial bioeconomic model that maximizes profit from crop and energy products, subject to the requirement that the biorefinery must be operated at full capacity. The model draws upon biophysical crop input-output coefficients simulated with the Environmental Policy Integrated Climate (EPIC) model as well as market input and output prices, spatial transportation costs, ethanol yields from biomass, and biorefinery capital and operational costs. The model was applied to 82 cropping systems simulated across 37 subwatersheds in a 9-county region of southern Michigan in response to ethanol prices simulated to rise from $1.78 to $3.36 per gallon. Results show that the decentralized local biomass processing depots lead to lower profitability but better environmental performance, due to more reliance on perennial grasses than the centralized biorefinery. Simulated technological improvement that reduces the processing cost and increases the ethanol yield of switchgrass by 17% could cause a shift to more processing of switchgrass, with increased profitability and environmental benefits.", "keywords": ["2. Zero hunger", "Michigan", "Ethanol", "Biomass production", " bioenergy supply", " cellulosic ethanol", " environmental trade-off analysis", " bioeconomic modeling", " EPIC", " spatial configuration", " local biomass processing", " Crop Production/Industries", " Environmental Economics and Policy", " Production Economics", " Resource /Energy Economics and Policy", " Q16", " Q15", " Q57", " Q18", "", "02 engineering and technology", "Environment", "Models", " Theoretical", "15. Life on land", "7. Clean energy", "13. Climate action", "Biofuels", "Costs and Cost Analysis", "0202 electrical engineering", " electronic engineering", " information engineering", "Computer Simulation", "Biomass"], "contacts": [{"organization": "Egbendewe-Mondzozo, Aklesso, Swinton, Scott M., Bals, Bryan D., Dale, Bruce E.,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1021/es303829w"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Environmental%20Science%20%26amp%3B%20Technology", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1021/es303829w", "name": "item", "description": "10.1021/es303829w", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1021/es303829w"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2013-01-11T00:00:00Z"}}, {"id": "10.1016/j.resconrec.2020.105318", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:16:04Z", "type": "Journal Article", "created": "2021-01-28", "title": "Insights from combining techno-economic and life cycle assessment \u2013 a case study of polyphenol extraction from red wine pomace", "description": "Abstract To determine the environmental and economic performance of emerging processes for the valorization of red wine pomace, a techno-economic assessment (TEA) and a Life Cycle Assessment (LCA) are combined at an early design stage. A case study of two polyphenol extraction methods at laboratory scale, solvent extraction (SE) and pressurized liquid extraction (PLE), were first analyzed via a carbon footprint (CFP). Subsequently, the laboratory scale design was improved and translated into industrial scale and a TEA was performed on the industrial scale designs. Finally, LCA was applied again with all impact indicators and the information gathered from both the TEA and LCA was combined into concise decision support, using Multiple Criteria Decision Analysis (MCDA). SE performs better than PLE, due to a lower solvent to DW ratio and a less expensive processing setup in both environmental and economic terms. The CFP of at laboratory scale aided in showing potential environmental hotspots and highlighted the need to reduce solvent use. The MCDA showed a shift in decision support depending on how strongly economic or environmental benefits are valued and eases the interpretation of the 19 different indicators derived from the TEA-LCA results. Both SE and PLE with a solvent to dry weight (DW) ratio of 5 and 10, respectively, perform competitively while SE with a solvent to DW ratio of 10 outperforms PLE with a solvent to DW ratio of 25. The case study illustrated how early design calculations (CFP), and combined LCA and TEA may be combined to improve process design.", "keywords": ["Techno-economic assessment", "Life-cycle assessment", "Solvent extraction", "02 engineering and technology", "/dk/atira/pure/sustainabledevelopmentgoals/responsible_consumption_and_production; name=SDG 12 - Responsible Consumption and Production", "01 natural sciences", "7. Clean energy", "solvent extraction", "12. Responsible consumption", "polyphenol extraction", "/dk/atira/pure/sustainabledevelopmentgoals/affordable_and_clean_energy; name=SDG 7 - Affordable and Clean Energy", "life cycle assessment", "13. Climate action", "Pressurized liquid extraction", "pressurized liquid extraction", "0202 electrical engineering", " electronic engineering", " information engineering", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.resconrec.2020.105318"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Resources%2C%20Conservation%20and%20Recycling", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.resconrec.2020.105318", "name": "item", "description": "10.1016/j.resconrec.2020.105318", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.resconrec.2020.105318"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-04-01T00:00:00Z"}}, {"id": "10.1016/j.rser.2012.09.002", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:16:04Z", "type": "Journal Article", "created": "2012-10-04", "title": "Harmonising Bioenergy Resource Potentials\u2014Methodological Lessons From Review Of State Of The Art Bioenergy Potential Assessments", "description": "Published estimates of the potential of bioenergy vary widely, mainly due to the heterogeneity of methodologies, assumptions and datasets employed. These discrepancies are confusing for policy and it is thus important to have scientific clarity on the basis of the assessment outcomes. Such clear insights can enable harmonisation of the different assessments. This review explores current state of the art approaches and methodologies used in bioenergy assessments, and identifies key elements that are critical determinants of bioenergy potentials. We apply the lessons learnt from the review exercise to compare and harmonise a selected set of country based bioenergy potential studies, and provide recommendations for conducting more comprehensive assessments. Depending on scenario assumptions, the harmonised technical biomass potential estimates up to 2030 in the selected countries range from 5.2 to 27.3 EJ in China, 1.1 to 18.8 EJ in India, 2.0 to 10.9 EJ in Indonesia, 1.6 to 7.0 EJ in Mozambique and 9.3 to 23.5 EJ in the US. From the review, we observed that generally, current studies do not cover all the basic (sustainability) elements expected in an ideal bioenergy assessment and there are marked differences in the level of parametric detail and methodological transparency between studies. Land availability and suitability lack spatial detail and especially degraded and marginal lands are poorly evaluated. Competition for water resources is hardly taken into account and biomass yields are based mostly on crude ecological zoning criteria. A few studies take into account improvements in management of agricultural and forestry production systems, but the underlying assumptions are hardly discussed. Competition for biomass resources among the various applications is crudely analysed in most studies and key assumptions such as demographic dynamics, biodiversity protection criteria, etc. are not explicitly discussed. To facilitate more comprehensive bioenergy assessments, we recommend an integrated analytical framework that includes all the key factors, employs high resolution geo-referenced datasets and accounts for potential feedback effects.", "keywords": ["greenhouse-gas", "spatial-distribution", "0211 other engineering and technologies", "Review", "02 engineering and technology", "7. Clean energy", "12. Responsible consumption", "11. Sustainability", "0202 electrical engineering", " electronic engineering", " information engineering", "Biomass", "SDG 15 - Life on Land", "2. Zero hunger", "Energy", "Milieukunde", "Methodology", "bio-energy", "Scheikunde", "15. Life on land", "plantation biomass resources", "carbon sequestration", "6. Clean water", "integrated approach", "sustainable bioenergy", "land-use scenarios", "13. Climate action", "climate-change", "water-use", "Potential"]}, "links": [{"href": "https://doi.org/10.1016/j.rser.2012.09.002"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Renewable%20and%20Sustainable%20Energy%20Reviews", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.rser.2012.09.002", "name": "item", "description": "10.1016/j.rser.2012.09.002", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.rser.2012.09.002"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2012-12-01T00:00:00Z"}}, {"id": "PMC10926174", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:24:20Z", "type": "Journal Article", "created": "2024-03-11", "title": "Microbial biotechnology and beyond: A roadmap for sustainable development and climate mitigation in the transition from fossil fuels to green chemistry", "description": "AbstractOur planet, which operates as a closed system, is facing increasing entropy due to human activities such as the overexploitation of natural resources and fossil fuel use. The COP28 in Dubai emphasized the urgency to abandon fossil fuels, recognizing them as the primary cause of human\uffe2\uff80\uff90induced environmental changes, while highlighting the need to transition to renewable energies. We promote the crucial role of microbes for sustaining biogenic cycles to combat climate change and the economic potential of synthetic biology tools for producing diverse non\uffe2\uff80\uff90fossil fuels and chemicals, thus contributing to emission reduction in transport and industry. The shift to \uffe2\uff80\uff98green chemistry\uffe2\uff80\uff99 encounters challenges, derived from the availability of non\uffe2\uff80\uff90food residues and waste (mainly lignocellulosic) as raw material, the construction of cost\uffe2\uff80\uff90effective bioprocessing plants, product recovery from fermentation broths and the utilization of leftover lignin residues for synthesizing new chemicals, aligning with circular economy and sustainable development goals. To meet the Paris Agreement goals, an urgent global shift to low\uffe2\uff80\uff90carbon, renewable sources is imperative, ultimately leading to the cessation of our reliance on fossil fuels.Metasurfaces have emerged as a breakthrough platform for manipulating light at the nanoscale and enabling on\uffe2\uff80\uff90demand optical functionalities for next\uffe2\uff80\uff90generation biosensing, imaging, and light\uffe2\uff80\uff90generating photonic devices. However, translating this technology to practical applications requires low\uffe2\uff80\uff90cost and high\uffe2\uff80\uff90throughput fabrication methods. Due to the limited choice of materials with suitable optical properties, it is particularly challenging to produce metasurfaces for the technologically relevant mid\uffe2\uff80\uff90infrared spectral range. These constraints are overcome by realizing functional metasurfaces on almost completely transparent free\uffe2\uff80\uff90standing metal\uffe2\uff80\uff90oxide membranes. A versatile nanofabrication process is developed and implemented for highly efficient dielectric and plasmonic mid\uffe2\uff80\uff90infrared metasurfaces with wafer\uffe2\uff80\uff90scale and complementary metal\uffe2\uff80\uff93oxide\uffe2\uff80\uff93semiconductor (CMOS)\uffe2\uff80\uff90compatible manufacturing techniques. The advantages of this method are revealed by demonstrating highly uniform and functional metasurfaces, including high\uffe2\uff80\uff90Q structures enabling fine spectral selectivity, large\uffe2\uff80\uff90area metalenses\uffc2\uffa0with\uffc2\uffa0diffraction\uffe2\uff80\uff90limited focusing capabilities, and birefringent metasurfaces providing polarization control at record\uffe2\uff80\uff90high conversion efficiencies.\uffc2\uffa0 Aluminum plasmonic devices and their integration into microfluidics for real\uffe2\uff80\uff90time and label\uffe2\uff80\uff90free mid\uffe2\uff80\uff90infrared biosensing of proteins and lipid vesicles are further demonstrated. The versatility of this approach and its compatibility with mass\uffe2\uff80\uff90production processes bring infrared metasurfaces markedly closer to commercial applications, such as thermal imaging, spectroscopy, and biosensing.Antibiotics are some of the most widely used drugs. Their release in the environment is of great concern since their consumption is a major factor for antibiotic resistance, one of the most important threats to human health. Their occurrence and fate in agricultural systems have been extensively investigated in recent years. Yet whilst their biotic and abiotic degradation pathways have been thoroughly researched, their biotransformation pathways in plants are less understood, such as in case of trimethoprim. Although trimethoprim has been reported in the environment, its fate in higher plants still remains unknown. A bench-scale experiment was performed and 30 trimethoprim metabolites were identified in lettuce (Lactuca sativa L.), of which 5 belong to phase I and 25 to phase II. Data mining yielded a list of 1018 ions as possible metabolite candidates, which was filtered to a final list of 87 candidates. Molecular structures were assigned for 19 compounds, including 14 TMP metabolites reported for the first time. Alongside well-known biotransformation pathways in plants, additional novel pathways were suggested, namely, conjugation with sesquiterpene lactones, and abscisic acid as a part of phase II of plant metabolism. The results obtained offer insight into the variety of phase II conjugates and may serve as a guideline for studying the metabolization of other chemicals that share a similar molecular structure or functional groups with trimethoprim. Finally, the toxicity and potential contribution of the identified metabolites to the selective pressure on antibiotic resistance genes and bacterial communities via residual antimicrobial activity were evaluated.
", "keywords": ["2. Zero hunger", "High-resolution mass spectrometry", "Phytochemicals", "0211 other engineering and technologies", "02 engineering and technology", "01 natural sciences", "Trimethoprim", "Anti-Bacterial Agents", "3. Good health", "Conjugates", "Antibiotics", "Non-target screening", "Humans", "Plant metabolites", "Biotransformation", "Research Paper", "Lactuca", "0105 earth and related environmental sciences"], "contacts": [{"organization": "Tadi\u0107, \u0110or\u0111e, Gramblicka, Michal, Mistrik, Robert, Bayona, Josep Maria,", "roles": ["creator"]}]}, "links": [{"href": "https://link.springer.com/content/pdf/10.1007/s00216-022-03943-6.pdf"}, {"href": "https://doi.org/10.1007/s00216-022-03943-6"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Analytical%20and%20Bioanalytical%20Chemistry", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1007/s00216-022-03943-6", "name": "item", "description": "10.1007/s00216-022-03943-6", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1007/s00216-022-03943-6"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2022-02-09T00:00:00Z"}}, {"id": "10.1016/j.geomorph.2022.108397", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:15:53Z", "type": "Journal Article", "created": "2022-08-05", "title": "A global review of subaqueous spreading and its morphological and sedimentological characteristics: A database for highlighting the current state of the art", "description": "Highlights \u2022 Subaqueous spreading occurs on gently inclined surfaces (<3\u00b0). \u2022 Gliding planes could be clays or sandy materials undergoing loss of strength. \u2022 It is documented on some of the largest marine landslides. \u2022 SubSpread Database includes 32 case studies. \u2022 Contourite and glaciogenic deposits represent often the slipping surfaces. Abstract Subaqueous spreading, a type of extensional mass transport that is characterized by a ridge and trough morphology, has been documented globally but is poorly understood. Subaqueous spreading is observed on gently inclined surfaces (typically <3\u00b0) when sediment bodies experience a sudden reduction of shear strength along their basal plane during clay softening or liquefaction of sands or silty sand sediment. Historically, spreading has been associated with very large landslides, but many unknown aspects of these mass movements have yet to be clarified. Does spreading influences the large catastrophic failure? What are the sedimentological and morphological aspects that contribute in initiating this process? These are some of the research questions that spurred the present work. Here, we introduce a database that incorporates information from thirty-two case studies, and use this to provide key insights into the sedimentary and morphological aspects of subaqueous spreading that will assist in the identification of spreading elsewhere. We find that subaqueous spreading is most common along passive glacial margins, but is also observed along active margins. The occurrence of contourites interlayered with glaciogenic deposits is, in most cases, associated with landslides (or landslide complexes) with spreading morphology. The database shows that seismic loading is commonly suggested to be the dominant trigger mechanism, although more geotechnical observations and modelling analysis would be needed to support this conclusion. We compare subaqueous spreading with terrestrial spreading, in particular to earthquake-related lateral spreading and clay landslides. We find that subaqueous spreading shares the same driving processes and potentially also some of the trigger mechanisms that are associated with the terrestrial spreading cases. Future work will be required to address the association between spreading and its occurrence on some of the largest landslides on Earth, its development mechanism, and its potential hazard implications.", "keywords": ["13. Climate action", "0211 other engineering and technologies", "02 engineering and technology", "14. Life underwater", "01 natural sciences", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://oceanrep.geomar.de/id/eprint/56812/8/1-s2.0-S0169555X22002902-main.pdf"}, {"href": "https://doi.org/10.1016/j.geomorph.2022.108397"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Geomorphology", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.geomorph.2022.108397", "name": "item", "description": "10.1016/j.geomorph.2022.108397", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.geomorph.2022.108397"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2022-10-01T00:00:00Z"}}, {"id": "10.1002/hyp.6971", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:16Z", "type": "Journal Article", "created": "2008-02-27", "title": "Investigation Of Runoff Generation In A Pristine, Poorly Gauged Catchment In The Chilean Andes I: A Multi-Method Experimental Study", "description": "AbstractCatchment scale hydrological process studies in southern Chile are of special interest as little research at this scale has been carried out in this region. In particular, the young volcanic ash soils, which are typical for this area, are not well understood in their hydrological behaviour. In addition, extensive land use changes require detailed knowledge of hydrological processes in disturbed as well as undisturbed catchments in order to estimate resulting risks of erosion, eutrophication, floods and droughts. This study focuses on data collection and experimental determination of relevant processes in an undisturbed forested catchment in the Andes of southern Chile. The here gained understanding of runoff generation can serve as a reference for comparison with sites subject to human intervention, improving estimation of the effects of land use change. Owing to the lack of long\uffe2\uff80\uff90term data for this catchment it was necessary to replace long time series by a multitude of experimental methods covering as many aspects of the runoff generation process as possible. The methods used in this investigation include: measurements of streamflow, rainfall, throughfall, water chemistry, soil water dynamics, groundwater dynamics, soil physics, soil mineralogy, geo\uffe2\uff80\uff90electrical sounding, and tracer techniques. Methods and equipment used during field campaigns are described and evaluated for usefulness versus expenditure (labour and financial costs). Selected results and the hypotheses developed from these findings are presented. The results suggest the importance of fast processes for rainfall runoff response on the one hand as well as considerable dampening effects of a large subsurface storage on the other hand. Copyright \uffc2\uffa9 2008 John Wiley & Sons, Ltd.
", "keywords": ["13. Climate action", "0208 environmental biotechnology", "0207 environmental engineering", "550 - Earth sciences", "02 engineering and technology", "15. Life on land", "6. Clean water"]}, "links": [{"href": "https://doi.org/10.1002/hyp.6971"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Hydrological%20Processes", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/hyp.6971", "name": "item", "description": "10.1002/hyp.6971", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/hyp.6971"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2008-02-27T00:00:00Z"}}, {"id": "10.1002/jctb.6842", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:16Z", "type": "Journal Article", "created": "2022-03-12", "title": "Phosphorus recovery from liquid digestate by chemical precipitation using low-cost ion sources", "description": "AbstractBACKGROUNDPhosphorus (P) recovered and recycled from agricultural waste, such precipitation of struvite (MgNH4PO4.6H2O) and calcium phosphates from the effluent after anaerobic digestion of wastes, is an important approach to developing environmentally sustainable fertilizers. However, for controlled phosphorus precipitation/recovery, it is usually necessary to supplement Ca2+ or Mg2+ ions; this represents more than 75% of the total operational costs and, as a result, hinders a more extensive application of this process. Therefore, there is a need to investigate alternative and low\uffe2\uff80\uff90cost cation sources to recover phosphorus by precipitation. This study investigated limestone powder as calcium source and seawater as a magnesium source for phosphorus recovery by precipitation from the liquid fraction of digestate. The main parameters affecting the efficiency of the precipitation process were assessed under (i) four different pH values and (ii) three different molar ratios (Ca or Mg: P).
RESULTSThe maximum phosphate removal rate was 44% for limestone powder at molar ratio 2:1 and pH\uffc2\uffa07. Higher phosphate removal using limestone powder was possibly inhibited by calcite precipitation. For seawater, the phosphate removal rate was 65% at molar ratio 2:1 and pH\uffc2\uffa010. Results of experiments using seawater at molar ratio 2:1 showed a decrease in K+ concentration and phosphate, suggesting that K\uffe2\uff80\uff90struvite precipitation may have occurred.
CONCLUSIONLimestone powder and seawater have a great potential to be used partially or totally as ion source for industrial recovery of P, mainly due to its very low cost. The recovered product could potentially be used as soil amendment and/or as phosphate rock substitute for fertilizer production. \uffc2\uffa9 2021 Society of Chemical Industry (SCI).
", "keywords": ["13. Climate action", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "01 natural sciences", "6. Clean water", "12. Responsible consumption", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://onlinelibrary.wiley.com/doi/pdf/10.1002/jctb.6842"}, {"href": "https://doi.org/10.1002/jctb.6842"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Chemical%20Technology%20%26amp%3B%20Biotechnology", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/jctb.6842", "name": "item", "description": "10.1002/jctb.6842", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/jctb.6842"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-07-16T00:00:00Z"}}, {"id": "10.1002/bbb.294", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:13Z", "type": "Journal Article", "created": "2011-07-14", "title": "Impact Assessment At The Bioenergy-Water Nexus", "description": "AbstractBioenergy expansion can significantly impact water resources in the region in which it occurs. Investment, policy, and resource management decisions related to bioenergy should therefore take this critical consideration into account. Water resource impacts can defy easy quantification because water consumption varies spatially and temporally, different water sources are not necessarily commensurable, and impact depends on the state of the resource base that is drawn upon. This perspective offers an assessment framework that operators and policy\uffe2\uff80\uff90makers can use in evaluating projects to avoid or mitigate detrimental effects. We adapt water footprint (WF) and life cycle assessment (LCA) techniques to the bioenergy context, describing comprehensive life cycle inventory (LCI) approaches that account for blue and green water use as well as for pollution effects, varying sources, coproduct allocation, and spatial heterogeneity. Impact assessment requires that characterization (weighting) factors be derived so that consumption values can be summed and compared across resources and locations. We recommend that characterization draw on metrics of water stress, accounting for environmental flow requirements, climatic variability, and non\uffe2\uff80\uff90linearity of water stress effects. Finally, we describe some location\uffe2\uff80\uff90specific impacts of concern that may not be revealed through common analytical approaches and may warrant closer consideration. \uffc2\uffa9 2011 Society of Chemical Industry and John Wiley & Sons, Ltd
", "keywords": ["13. Climate action", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "01 natural sciences", "7. Clean energy", "6. Clean water", "0105 earth and related environmental sciences", "12. Responsible consumption"], "contacts": [{"organization": "Kevin Fingerman, Stuart Orr, Brian Richter, P. Vugteveen, G\u00f6ran Berndes,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1002/bbb.294"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Biofuels%2C%20Bioproducts%20and%20Biorefining", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/bbb.294", "name": "item", "description": "10.1002/bbb.294", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/bbb.294"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2011-07-01T00:00:00Z"}}, {"id": "10.1002/essoar.10505132.1", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:15Z", "type": "Journal Article", "created": "2020-12-04", "title": "Non-Gaussian parameter inference for hydrogeological models using Stein Variational Gradient Descent", "description": "AbstractThe sustainable management of groundwater demands a faithful characterization of the subsurface. This, in turn, requires information which is generally not readily available. To bridge the gap between data need and availability, numerical models are often used to synthesize plausible scenarios not only from direct information but also from additional, indirect data. Unfortunately, the resulting system characterizations will rarely be unique. This poses a challenge for practical parameter inference: computational limitations often force modelers to resort to methods based on questionable assumptions of Gaussianity, which do not reproduce important facets of ambiguity such as Pareto fronts or multimodality. In search of a remedy, an alternative could be found in Stein Variational Gradient Descent (SVGD), a recent development in the field of statistics. This ensemble\uffe2\uff80\uff90based method iteratively transforms a set of arbitrary particles into samples of a potentially non\uffe2\uff80\uff90Gaussian posterior, provided the latter is sufficiently smooth. A prerequisite for this method is knowledge of the Jacobian, which is usually exceptionally expensive to evaluate. To address this issue, we propose an ensemble\uffe2\uff80\uff90based, localized approximation of the Jacobian. We demonstrate the performance of the resulting algorithm in two cases: a simple, bimodal synthetic scenario, and a complex numerical model based on a real world, prealpine catchment. Promising results in both cases\uffe2\uff80\uff94even when the ensemble size is smaller than the number of parameters\uffe2\uff80\uff94suggest that SVGD can be a valuable addition to hydrogeological parameter inference.Measurements of nitrous oxide (N2O) emissions from agriculture are essential for understanding the complex soil\uffe2\uff80\uff93crop\uffe2\uff80\uff93climate processes, but there are practical and economic limits to the spatial and temporal extent over which measurements can be made. Therefore, N2O models have an important role to play. As models are comparatively cheap to run, they can be used to extrapolate field measurements to regional or national scales, to simulate emissions over long time periods, or to run scenarios to compare mitigation practices. Process\uffe2\uff80\uff90based models can also be used as an aid to understanding the underlying processes, as they can simulate feedbacks and interactions that can be difficult to distinguish in the field. However, when applying models, it is important to understand the conceptual process differences in models, how conceptual understanding changed over time in various models, and the model requirements and limitations to ensure that the model is well suited to the purpose of the investigation and the type of system being simulated. The aim of this paper is to give the reader a high\uffe2\uff80\uff90level overview of some of the important issues that should be considered when modeling. This includes conceptual understanding of widely used models, common modeling techniques such as calibration and validation, assessing model fit, sensitivity analysis, and uncertainty assessment. We also review examples of N2O modeling for different purposes and describe three commonly used process\uffe2\uff80\uff90based N2O models (APSIM, DayCent, and DNDC).A meta\uffe2\uff80\uff90analysis data\uffe2\uff80\uff90driven approach is developed to represent the soil evaporative efficiency (SEE) defined as the ratio of actual to potential soil evaporation. The new model is tested across a bare soil database composed of more than 30 sites around the world, a clay fraction range of 0.02\uffe2\uff80\uff930.56, a sand fraction range of 0.05\uffe2\uff80\uff930.92, and about 30,000 acquisition times. SEE is modeled using a soil resistance (rss) formulation based on surface soil moisture (\uffce\uffb8) and two resistance parameters and \uffce\uffb8efolding. The data\uffe2\uff80\uff90driven approach aims to express both parameters as a function of observable data including meteorological forcing, cut\uffe2\uff80\uff90off soil moisture value at which SEE=0.5, and first derivative of SEE at , named . An analytical relationship between and is first built by running a soil energy balance model for two extreme conditions with rss\uffe2\uff80\uff89=\uffe2\uff80\uff890 and using meteorological forcing solely, and by approaching the middle point from the two (wet and dry) reference points. Two different methods are then investigated to estimate the pair either from the time series of SEE and \uffce\uffb8 observations for a given site, or using the soil texture information for all sites. The first method is based on an algorithm specifically designed to accomodate for strongly nonlinear relationships and potentially large random deviations of observed SEE from the mean observed . The second method parameterizes as a multi\uffe2\uff80\uff90linear regression of clay and sand percentages, and sets to a constant mean value for all sites. The new model significantly outperformed the evaporation modules of ISBA (Interaction Sol\uffe2\uff80\uff90Biosph\uffc3\uffa8re\uffe2\uff80\uff90Atmosph\uffc3\uffa8re), H\uffe2\uff80\uff90TESSEL (Hydrology\uffe2\uff80\uff90Tiled ECMWF Scheme for Surface Exchange over Land), and CLM (Community Land Model). It has potential for integration in various land\uffe2\uff80\uff90surface schemes, and real calibration capabilities using combined thermal and microwave remote sensing data.The conversion to climate-stable, resilient and productive forests has resulted in an increasing share of mixed stands. Different growth conditions and silvicultural treatments lead to an increased scatter in strength compared to what is expected from monoculture experience. The study (i) quantified the magnitude of variation in strength of European beech timber from stands of different composition and (ii) showed the impact of grading on the characteristic strength value of timber coming from those stands. Strength grading models and machine settings for hardwood tensile classes on over 900 European beech (Fagus sylvatica L.) boards were derived. One model used only the dynamic modulus of elasticity (Edyn), and a more complex model used a knot value in addition. Afterwards, 407 boards from pure beech stands as well as mixed stands of beech with Douglas fir (Pseudotsuga menziesii (Mirb.) Franco), Norway spruce (Picea abies (L.) Karst.), sessile oak (Quercus petraea (Matt.) Liebl.), and Scots pine (Pinus sylvestris L.) were graded and analyzed for their material properties from tension tests parallel to grain. Although a variance components analysis attributed only 4.2% of the variation to mixture, the ungraded timber showed significant strength differences between the pure and the beech-pine stands (65.2 versus 46.6\uffc2\uffa0MPa). The yield of the material graded to the highest class in a class combination was higher in pure beech stands. The required characteristic strength values were mostly met for boards from the pure stands; while boards from the beech-pine mixed stands hardly ever reached the required values. To reduce strength variation and guarantee reliable timber products, strength grading should consider the various growth situations in forests when sampling material for the derivation of settings.
", "keywords": ["690", "0106 biological sciences", "Original ; Wood Science & Technology ; Ceramics", " Glass", " Composites", " Natural Materials ; Manufacturing", " Machines", " Tools", " Processes", "ddc:630", "0401 agriculture", " forestry", " and fisheries", "04 agricultural and veterinary sciences", "15. Life on land", "01 natural sciences", "ddc:"]}, "links": [{"href": "https://link.springer.com/content/pdf/10.1007/s00226-022-01398-7.pdf"}, {"href": "https://doi.org/10.1007/s00226-022-01398-7"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Wood%20Science%20and%20Technology", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1007/s00226-022-01398-7", "name": "item", "description": "10.1007/s00226-022-01398-7", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1007/s00226-022-01398-7"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2022-07-01T00:00:00Z"}}, {"id": "10.1002/2016JD026042", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:12Z", "type": "Journal Article", "created": "2017-06-17", "title": "Relation between precipitation location and antecedent/subsequent soil moisture spatial patterns", "description": "AbstractRecent evidence has shown that relations between soil moisture and precipitation at spatial and temporal aspect are contrary to each other: afternoon precipitation tends to occur at times in which conditions are overall wet and heterogeneous in the morning, but preferentially over those patches that are relatively drier than the surroundings. This study expands the notion of soil moisture\uffe2\uff80\uff90precipitation spatial coupling by analyzing the preferred precipitation location over a range of different soil moisture patterns. Using global observations of precipitation and observationally constrained evaporative stress estimates, we confirm that relatively drier patches have more chances of receiving rain, but the preference is weakened under wetter soil conditions. During extremely wet times, wet patches have more chances of receiving rain. Moreover, the preference of precipitation to occur on drier soils is stronger when soil moisture conditions are heterogeneous. Such results indicate that the positive feedback mechanism becomes more positive as soil wetness increases and the negative feedback mechanism becomes more negative as soils become drier and more heterogeneous. The strength of these two feedback mechanisms jointly affects preferential precipitation location. Counterintuitively, analysis from 1\uffc2\uffa0day after\uffe2\uff80\uff90event soil moisture pattern shows that negative soil moisture\uffe2\uff80\uff90precipitation coupling may in turn further heterogenize soil moisture patterns, because dry patch gets extremely wet with no or less rain in surrounding. Although results here do not necessarily imply a causal relationship, this work contributes to enhancing our understanding of soil moisture\uffe2\uff80\uff90precipitation spatial coupling and exposes the complex nuances of these land\uffe2\uff80\uff90atmosphere interactions.
", "keywords": ["13. Climate action", "0207 environmental engineering", "02 engineering and technology", "15. Life on land", "01 natural sciences", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2016JD026042"}, {"href": "https://doi.org/10.1002/2016JD026042"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Atmospheres", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2016JD026042", "name": "item", "description": "10.1002/2016JD026042", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2016JD026042"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-06-27T00:00:00Z"}}, {"id": "10.1002/2016JD026099", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:12Z", "type": "Journal Article", "created": "2017-04-07", "title": "Global soil moisture bimodality in satellite observations and climate models", "description": "AbstractA new diagnostic metric based on soil moisture bimodality is developed in order to examine and compare soil moisture from satellite observations and Earth System Models. The methodology to derive this diagnostic is based on maximum likelihood estimator encoded into an iterative algorithm, which is applied to the soil moisture probability density function. This metric is applied to satellite data from the Advanced Microwave Scanning Radiometer for the Earth Observing System and global climate models data from the Coupled Model Intercomparison Project Phase 5 (CMIP5). Results show high soil moisture bimodality in transitional climate areas and high latitudes, potentially associated with land\uffe2\uff80\uff90atmosphere feedback processes. When comparing satellite versus climate models, a clear difference in their soil moisture bimodality is observed, with systematically higher values in the case of CMIP5 models. These differences appear related to areas where land\uffe2\uff80\uff90atmospheric feedback may be overestimated in current climate models.
", "keywords": ["PREFERENTIAL STATES", "IMPACT", "MIXTURE", "SCHEME", "0207 environmental engineering", "NORMAL-DISTRIBUTIONS", "02 engineering and technology", "15. Life on land", "01 natural sciences", "PART I", "satellite soil moisture", "climate models", "13. Climate action", "Earth and Environmental Sciences", "LAND-SURFACE MODEL", "PRECIPITATION", "SDG 13 - Climate Action", "CMIP5", "ATMOSPHERE COUPLING EXPERIMENT", "land-atmosphere interactions", "soil moisture", "bimodality", "SYSTEM", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2016JD026099"}, {"href": "https://doi.org/10.1002/2016JD026099"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Atmospheres", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2016JD026099", "name": "item", "description": "10.1002/2016JD026099", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2016JD026099"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-04-27T00:00:00Z"}}, {"id": "10.1002/2016JF004060", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:12Z", "type": "Journal Article", "created": "2017-03-06", "title": "Investigation of rock fragmentation during rockfalls and rock avalanches via 3-D discrete element analyses", "description": "AbstractThis paper investigates the characteristics of dynamic rock fragmentation and its influence on the postfailure fragment trajectory. A series of numerical simulations by discrete element method (DEM) were performed for a simple rock block and slope geometry, where a particle agglomerate of prismatic shape is released along a sliding plane and subsequently collides onto a flat horizontal plane at a sharp kink point. The rock block is modeled as an assembly of bonded spherical particles with fragmentation arising from bond breakages. Bond strength and stiffness were calibrated against available experimental data. We analyzed how dynamic fragmentation occurs at impact, together with the generated fragment size distributions and consequently their runout for different slope topographies. It emerges that after impact, the vertical momentum of the granular system decreases sharply to nil, while the horizontal momentum increases suddenly and then decreases. The sudden boost of horizontal momentum can effectively facilitate the transport of fragments along the bottom floor. The rock fragmentation intensity is associated with the input energy and increases quickly with the slope angle. Gentle slopes normally lead to long spreading distance and large fragments, while steep slopes lead to high momentum boosts and impact forces, with efficient rock fragmentation and fine deposits. The fragment size decreases, while the fracture stress and fragment number both increase with the impact loading strain rate, supporting the experimental observations. The fragment size distributions can be well fitted by the Weibull's distribution function.
", "keywords": ["550", "DEM; dynamic fragmentation; loading rate; momentum boost; rock avalanche; runout;", "13. Climate action", "0211 other engineering and technologies", "02 engineering and technology", "Fragmentation", " rockslide", " rockavalanche", " DEM", " numerical modeling", " runout", "551", "01 natural sciences", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2016JF004060"}, {"href": "https://eprints.ncl.ac.uk/fulltext.aspx?url=237479/388C5B83-7098-4BA3-A221-B7B1CEFCC63B.pdf&pub_id=237479"}, {"href": "https://doi.org/10.1002/2016JF004060"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Earth%20Surface", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2016JF004060", "name": "item", "description": "10.1002/2016JF004060", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2016JF004060"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-03-01T00:00:00Z"}}, {"id": "10.1002/2017JB015210", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:12Z", "type": "Journal Article", "created": "2018-03-12", "title": "Dynamic Fragmentation of Jointed Rock Blocks During Rockslide-Avalanches: Insights From Discrete Element Analyses", "description": "AbstractThe dynamic fragmentation of jointed rock blocks during rockslide avalanches has been investigated by discrete element method simulations for a multiple arrangement of a rock block sliding over a simple slope geometry. The rock blocks are released along an inclined sliding plane and subsequently collide onto a flat horizontal plane at a sharp kink point. The contact force chains generated by the impact appear initially at the bottom frontal corner of the rock block and then propagate radially upward to the top rear part of the block. The jointed rock blocks exhibit evident contact force concentration and discontinuity of force wave propagation near the joint, associating with high energy dissipation of granular dynamics. The corresponding force wave propagation velocity can be less than 200\uffc2\uffa0m/s, which is much smaller than that of an intact rock (1,316\uffc2\uffa0m/s). The concentration of contact forces at the bottom leads to high rock fragmentation intensity and momentum boosts, facilitating the spreading of many fine fragments to the distal ends. However, the upper rock block exhibits very low rock fragmentation intensity but high energy dissipation due to intensive friction and damping, resulting in the deposition of large fragments near the slope toe. The size and shape of large fragments are closely related to the orientation and distribution of the block joints. The cumulative fragment size distribution can be well fitted by the Weibull's distribution function, with very gentle and steep curvatures at the fine and coarse size ranges, respectively. The numerical results of fragment size distribution can match well some experimental and field observations.
", "keywords": ["discrete element method; dynamic fragmentation; force wave; fragment size distribution; jointed rock; rockslide avalanche;", "discrete element method; dynamic fragmentation; force wave; fragment size distribution; jointed rock; rockslide avalanche", "0211 other engineering and technologies", "02 engineering and technology", "551", "530", "01 natural sciences", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2017JB015210"}, {"href": "https://doi.org/10.1002/2017JB015210"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Solid%20Earth", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2017JB015210", "name": "item", "description": "10.1002/2017JB015210", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2017JB015210"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2018-04-01T00:00:00Z"}}, {"id": "10.1002/bbb.286", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:13Z", "type": "Journal Article", "created": "2011-05-12", "title": "Impacts Of Co-Location, Co-Production, And Process Energy Source On Life Cycle Energy Use And Greenhouse Gas Emissions Of Lignocellulosic Ethanol", "description": "AbstractThe performance of lignocellulosic ethanol in reducing greenhouse gas (GHG) emissions and fossil energy use when substituting for gasoline depends on production technologies and system decisions, many of which have not been considered in life cycle studies. We investigate ethanol production from short rotation forestry feedstock via an uncatalyzed steam explosion pre\uffe2\uff80\uff90treatment and enzymatic hydrolysis process developed by Mascoma Canada, Inc., and examine a set of production system decisions (co\uffe2\uff80\uff90location, co\uffe2\uff80\uff90production, and process energy options) in terms of their influence on life cycle emissions and energy consumption. All production options are found to reduce emissions and petroleum use relative to gasoline on a well\uffe2\uff80\uff90to\uffe2\uff80\uff90wheel (WTW) basis; GHG reductions vary by production scenario. Land\uffe2\uff80\uff90use\uffe2\uff80\uff90change effects are not included due to a lack of applicable data on short rotation forestry feedstock. Ethanol production with wood pellet co\uffe2\uff80\uff90product, displacing coal in electricity generation, performs best amongst co\uffe2\uff80\uff90products in terms of GHG mitigation (\uffe2\uff88\uff92109% relative to gasoline, WTW basis). Maximizing pellet output, although requiring import of predominately fossil\uffe2\uff80\uff90based process energy, improves overall GHG\uffe2\uff80\uff90mitigation performance (\uffe2\uff88\uff92130% relative to gasoline, WTW). Similarly, lower ethanol yields result in greater GHG reductions because of increased co\uffe2\uff80\uff90product output. Co\uffe2\uff80\uff90locating ethanol production with facilities exporting excess steam and biomass\uffe2\uff80\uff90based electricity (e.g. pulp mills) achieves the greatest GHG mitigation (\uffe2\uff88\uff92174% relative to gasoline, WTW) by maximizing pellet output and utilizing low\uffe2\uff80\uff90GHG process energy. By exploiting co\uffe2\uff80\uff90location opportunities and strategically selecting co\uffe2\uff80\uff90products, lignocellulosic ethanol can provide large emission reductions, particularly if based upon sustainably grown, high yield, low input feedstocks. \uffc2\uffa9 2011 Society of Chemical Industry and John Wiley & Sons, Ltd
", "keywords": ["13. Climate action", "11. Sustainability", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "15. Life on land", "01 natural sciences", "7. Clean energy", "0105 earth and related environmental sciences", "12. Responsible consumption"]}, "links": [{"href": "https://doi.org/10.1002/bbb.286"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Biofuels%2C%20Bioproducts%20and%20Biorefining", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/bbb.286", "name": "item", "description": "10.1002/bbb.286", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/bbb.286"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2011-05-01T00:00:00Z"}}, {"id": "10.1002/adfm.201910259", "type": "Feature", "geometry": null, "properties": {"updated": "2026-08-23T16:14:13Z", "type": "Journal Article", "created": "2020-03-12", "title": "All\u2010Dielectric Programmable Huygens' Metasurfaces", "description": "AbstractLow\uffe2\uff80\uff90loss nanostructured dielectric metasurfaces have emerged as a breakthrough platform for ultrathin optics and cutting\uffe2\uff80\uff90edge photonic applications, including beam shaping, focusing, and holography. However, the static nature of their constituent materials has traditionally limited them to fixed functionalities. Tunable all\uffe2\uff80\uff90dielectric infrared Huygens' metasurfaces consisting of multi\uffe2\uff80\uff90layer Ge disk meta\uffe2\uff80\uff90units with strategically incorporated non\uffe2\uff80\uff90volatile phase change material Ge3Sb2Te6 are introduced. Switching the phase\uffe2\uff80\uff90change material between its amorphous and crystalline structural state enables nearly full dynamic light phase control with high transmittance in the mid\uffe2\uff80\uff90IR spectrum. The metasurface is realized experimentally, showing post\uffe2\uff80\uff90fabrication tuning of the light phase within a range of 81% of the full 2\uffcf\uff80 phase shift. Additionally, the versatility of the tunable Huygen's metasurfaces is demonstrated by optically programming the spatial light phase distribution of the metasurface with single meta\uffe2\uff80\uff90unit precision and retrieving high\uffe2\uff80\uff90resolution phase\uffe2\uff80\uff90encoded images using hyperspectral measurements. The programmable metasurface concept overcomes the static limitations of previous dielectric metasurfaces, paving the way for \uffe2\uff80\uff9cuniversal\uffe2\uff80\uff9d metasurfaces and highly efficient, ultracompact active optical elements like tunable lenses, dynamic holograms, and spatial light modulators.Integrating photoactive proteins with synthetic nanomaterials holds great promise in developing optoelectronic devices whereby light, captured by a antenna protein, is converted to a modulated electrical response. The protein\uffe2\uff80\uff93nanomaterial interface is critical to defining optoelectronic properties; successful integration of bionanohybrids requires control over protein attachment site and a detailed understanding of its impact on device performance. Here, the first single\uffe2\uff80\uff90walled carbon nanotube (SWCNT) bio\uffe2\uff80\uff90optoelectronic transistor enabled by the site\uffe2\uff80\uff90specific direct interfacing with a green fluorescent protein (GFP) via genetically encoded phenyl azide photochemistry is reported. The electrical behavior of individual semiconducting SWCNTs depends on the protein residue coupling site and provides the basis to design eco\uffe2\uff80\uff90friendly phototransistors and optoelectronic memory. Attachment at one GFP residue proximal to the chromophore produces a wavelength\uffe2\uff80\uff90specific phototransistor. The bio\uffe2\uff80\uff90transistor can be switched off in less than 38 s with responsivity up to 7 \uffc3\uff97 103 A W\uffe2\uff88\uff921 at 470\uffc2\uffa0nm. Attachment via a second residue distal to the chromophore generates optoelectronic memory that show rapid and reproducible conductivity switching with up to 15\uffe2\uff80\uff90fold modulation that is restored on the application of a gate voltage. Therefore, photoactive proteins, especially GFP, can be realized as a key material for novel single\uffe2\uff80\uff90molecule electronic and photonic devices.Polarization is a fundamental property of electromagnetic waves that plays a key role in many physical phenomena and applications. Schemes to manipulate it are revisited with the emergence of metasurfaces, which have brought multi\uffe2\uff80\uff90functionalities straightforwardly. However, this has come at the expense of design complexity that relies strongly on field theory. Here, an ingenious strategy of modular design is proposed to construct subwavelength multifunctional polarization control devices. Chiral metasurfaces with different handedness are first proposed and regarded as modules. The versatile polarization controller can thus be obtained with the combination of different modules. These experiments demonstrate that the well\uffe2\uff80\uff90designed polarization controller possesses reconfigurable functionality, and various broadband polarization and amplitude regulation functions with high efficiency including arbitrary linear polarization rotation, asymmetric transmission effect, neutral\uffe2\uff80\uff90density\uffe2\uff80\uff90like filter, polarization beam splitter, etc., can be readily realized just by changing the cascaded modules. The physical mechanisms of the versatile polarization controller and chiral metasurface modules are both guaranteed by the Fabry\uffe2\uff80\uff93P\uffc3\uffa9rot\uffe2\uff80\uff90like resonances, which are theoretically verified via the transfer matrix method. It is envisioned that the modular concept will be of great benefit to designing compact multifunctional polarization controllers.The molecular alignment of platinum(II) octaethyl porphyrin (PtOEP) crystals evaporated on KBr (see atomic force microscopy image, Figure) can be readily changed from perpendicular to parallel by changing the substrate temperature. The field\uffe2\uff80\uff90effect mobility of transisitors prepared using epitaxially grown PtOEP films aligned perpendicularly to a substrate is 100 times higher than that of those of parallel alignment.Insights into the fascinating molecular world of biological processes are crucial for understanding diseases, developing diagnostics, and effective therapeutics. These processes are complex as they involve interactions between four major classes of biomolecules, i.e., proteins, nucleic acids, carbohydrates, and lipids, which makes it important to be able to discriminate between all these different biomolecular species. In this work, a deep learning\uffe2\uff80\uff90augmented, chemically\uffe2\uff80\uff90specific nanoplasmonic technique that enables such a feat in a label\uffe2\uff80\uff90free manner to not disrupt native processes is presented. The method uses a highly sensitive multiresonant plasmonic metasurface in a microfluidic device, which enhances infrared absorption across a broadband mid\uffe2\uff80\uff90IR spectrum and in water, despite its strongly overlapping absorption bands. The real\uffe2\uff80\uff90time format of the optofluidic method enables the collection of a vast amount of spectrotemporal data, which allows the construction of a deep neural network to discriminate accurately between all major classes of biomolecules. The capabilities of the new method are demonstrated by monitoring of a multistep bioassay containing sucrose\uffe2\uff80\uff90 and nucleotides\uffe2\uff80\uff90loaded liposomes interacting with a small, lipid membrane\uffe2\uff80\uff90perforating peptide. It is envisioned that the presented technology will impact the fields of biology, bioanalytics, and pharmacology from fundamental research and disease diagnostics to drug development.