{"type": "FeatureCollection", "features": [{"id": "10.1016/j.firesaf.2017.03.082", "type": "Feature", "geometry": null, "properties": {"updated": "2026-10-06T16:16:06Z", "type": "Journal Article", "created": "2017-05-20", "title": "Pyrolysis kinetics and multi-objective inverse modelling of cellulose at the microscale", "description": "Abstract   The chemistry of pyrolysis, together with heat transfer, drives ignition and flame spread of biomass materials under many fire conditions, but it is poorly understood. Cellulose is the main component of biomass and is often taken as a surrogate for biomass. Its chemistry of pyrolysis is simpler and dominates the pyrolysis of biomass. Many reaction schemes with corresponding kinetic parameters can be found in the literature for the pyrolysis of cellulose, but their appropriateness for fire is unknown. This study investigated inverse modelling and blind predictions of six reaction schemes of different complexities for isothermal and non-isothermal thermogravimetric experiments. We used multi-objective optimisation to simultaneously and separately inverse model the kinetic parameters of each reaction scheme to several experiments. Afterwards we tested these parameters with blind predictions. For the first time, we reveal a set of equally viable solutions for the modelling of pyrolysis chemistry of different experiments. This set of solutions is called a Pareto front, and represents a trade-off between predictions of different experiments. It stems from the uncertainty in the experiments and in the modelling. Parameters derived from non-isothermal experiments compared well with the literature, and performed well in blind predictions of both isothermal and non-isothermal experiments. Complexity beyond the Broido-Shafizadeh scheme with seven parameters proved to be unnecessary to predict the mass loss of cellulose; hence, simple reaction schemes are most appropriate for macroscale fire models. Modellers should, therefore, use simple reaction schemes to model pyrolysis in macroscale fire models.", "keywords": ["13. Climate action", "0904 Chemical Engineering", "General Physics and Astronomy", "General Materials Science", "General Chemistry", "Building and Construction", "624", "540", "Safety", " Risk", " Reliability and Quality", "Civil Engineering", "7. Clean energy", "European Research Council"], "contacts": [{"organization": "Richter, F, Rein, G,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1016/j.firesaf.2017.03.082"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Fire%20Safety%20Journal", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.firesaf.2017.03.082", "name": "item", "description": "10.1016/j.firesaf.2017.03.082", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.firesaf.2017.03.082"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-07-01T00:00:00Z"}}, {"id": "10.1016/j.mtcomm.2020.100988", "type": "Feature", "geometry": null, "properties": {"updated": "2026-10-06T16:16:30Z", "type": "Journal Article", "created": "2020-02-07", "title": "The effect of soil incubation on bio self-healing of cementitious mortar", "description": "Abstract   Successful implementation of bacteria-based self-healing in cracked cementitious materials requires the provision of a suitable incubation environment, which can activate the bacteria to produce e.g. calcium carbonate sealing the cracks. Research to date has focused on the self-healing process in humid air and water. However, almost all structures are built on or in the ground, thus, significant amounts of concrete are exposed to ground conditions. To investigate the effect of soil incubation on the self-healing process, laboratory experiments were conducted on mortar impregnated with Bacillus subtilis (encapsulated in calcium alginate). The mortar specimens were initially cracked and subdivided into three groups and each group was incubated for 28 days within different incubation environments, namely, partially-saturated soil, full-saturated soil, and water. Supported by Scanning Electron Microscope (SEM) and Energy Dispersive X-Ray Spectrometry (EDX), the results revealed that the bio self-healing can be activated within the cracks under the saturated regime of soil as far as the matric suction is smaller than the capillary pressure of the cracks. Moreover, the results indicated there was no evidence suggesting the influence of naturally existing bacteria in the soil on the self-healing process within the considered incubation period.", "keywords": ["Mechanics of Materials", "Materials Chemistry", "0211 other engineering and technologies", "General Materials Science", "02 engineering and technology", "0210 nano-technology"]}, "links": [{"href": "https://doi.org/10.1016/j.mtcomm.2020.100988"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Materials%20Today%20Communications", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.mtcomm.2020.100988", "name": "item", "description": "10.1016/j.mtcomm.2020.100988", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.mtcomm.2020.100988"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2020-09-01T00:00:00Z"}}, {"id": "10.1016/j.solener.2020.08.074", "type": "Feature", "geometry": null, "properties": {"updated": "2026-10-06T16:16:48Z", "type": "Journal Article", "created": "2020-09-07", "title": "Optimum cleaning schedule of photovoltaic systems based on levelised cost of energy and case study in central Mexico", "description": "Abstract   In this paper, the soiling impact on photovoltaic systems in Aguascalientes, in central Mexico, an area where 1.4GWp of new photovoltaic capacity is being installed, is characterised experimentally. A soiling rate of \u22120.16%/day in the dry season for optimally tilted crystalline silicon modules, and a stabilization of the soiling losses at 11.2% after 70\u00a0days of exposure were observed. With these data, a first of its kind novel method for determining optimum cleaning schedules is proposed based on minimising the levelised cost of energy. The method has the advantages compared to other existing methods of considering the system investment cost in the determination of the optimum cleaning schedule. Also, it does not depend on economic revenue data, which are often subject to uncertainty. The results show that residential and commercial systems should be cleaned once per year in Aguascalientes. On the other hand, cleaning intervals from 12 to 31\u00a0days in the dry season were estimated for utility-scale systems, due to the dramatic decrease of cleaning costs per unit photovoltaic capacity. We also present a comparative analysis of the existing criteria for optimising cleaning schedules applied to the same case study. The different methods give similar cleaning intervals for utility-scale systems and, thus, the choice of a suitable method depends on the availability of information.", "keywords": ["Schedule", "Renewable Energy", " Sustainability and the Environment", "Photovoltaic system", "Environmental engineering", "0211 other engineering and technologies", "02 engineering and technology", "7. Clean energy", "cleaning schedule; crystalline silicon; levelised cost of energy; Mexico; photovoltaic; soiling", "13. Climate action", "0202 electrical engineering", " electronic engineering", " information engineering", "Revenue", "Environmental science", "General Materials Science", "Investment cost", "Crystalline silicon"]}, "links": [{"href": "https://iris.uniroma1.it/bitstream/11573/1625678/3/Rodrigo_preprint_Optimum_2020.pdf"}, {"href": "https://doi.org/10.1016/j.solener.2020.08.074"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Solar%20Energy", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.solener.2020.08.074", "name": "item", "description": "10.1016/j.solener.2020.08.074", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.solener.2020.08.074"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2020-10-01T00:00:00Z"}}, {"id": "10.1021/acsami.9b03062", "type": "Feature", "geometry": null, "properties": {"updated": "2026-10-06T16:17:04Z", "type": "Journal Article", "created": "2019-05-06", "title": "Core\u2013Shell NaHoF 4 @TiO 2 NPs: A Labeling Method to Trace Engineered Nanomaterials of Ubiquitous Elements in the Environment", "description": "Understanding the fate and behavior of nanoparticles (NPs) in the natural environment is important to assess their potential risk. Single particle inductively coupled plasma mass spectrometry (spICP-MS) allows for the detection of NPs at extremely low concentrations, but the high natural background of the constituents of many of the most widely utilized nanoscale materials makes accurate quantification of engineered particles challenging. Chemical doping, with a less naturally abundant element, is one approach to address this; however, certain materials with high natural abundance, such as TiO2 NPs, are notoriously difficult to label and differentiate from natural NPs. Using the low abundance rare earth element Ho as a marker, Ho-bearing core -TiO2 shell (NaHoF4@TiO2) NPs were designed to enable the quantification of engineered TiO2 NPs in real environmental samples. The NaHoF4@TiO2 NPs were synthesized on a large scale (gram), at relatively low temperatures, using a sacrificial Al(OH)3 template that confines the hydrolysis of TiF4 within the space surrounding the NaHoF4 NPs. The resulting NPs consist of a 60 nm NaHoF4 core and a 5 nm anatase TiO2 shell, as determined by TEM, STEM-EDX mapping, and spICP-MS. The NPs exhibit excellent detectability by spICP-MS at extremely low concentrations (down to 1 \u00d7 10-3 ng/L) even in complex natural environments with high Ti background.", "keywords": ["13. Climate action", "General Materials Science", "01 natural sciences", "0104 chemical sciences"]}, "links": [{"href": "https://pubs.acs.org/doi/pdf/10.1021/acsami.9b03062"}, {"href": "https://doi.org/10.1021/acsami.9b03062"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/ACS%20Applied%20Materials%20%26amp%3B%20Interfaces", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1021/acsami.9b03062", "name": "item", "description": "10.1021/acsami.9b03062", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1021/acsami.9b03062"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2019-05-06T00:00:00Z"}}, {"id": "10.1617/s11527-021-01690-1", "type": "Feature", "geometry": null, "properties": {"updated": "2026-10-06T16:18:50Z", "type": "Journal Article", "created": "2021-04-14", "title": "Self-healing of bio-cementitious mortar incubated within neutral and acidic soil", "description": "Abstract<p>The efficiency of bio self-healing of pre-cracked mortar specimens incubated in sand was investigated. The investigation examined the effect of soil pH representing industrially recognised classes of exposure, ranging from no risk of chemical attack (neutral pH\uffe2\uff80\uff89\uffe2\uff89\uff88\uffe2\uff80\uff897) to very high risk (pH\uffe2\uff80\uff89\uffe2\uff89\uff88\uffe2\uff80\uff894.5). Simultaneously, the soil was subjected to fully and partially saturated cycles for 120\uffc2\uffa0days to resemble groundwater-level fluctuation. Bacillus subtilis with nutrients were impregnated into perlite and utilised as a bacterial healing agent. The healing agent was added to half of the mortar specimens for comparison purposes. Mineral precipitations were observed in both control and bio-mortar specimens, and the healing products were examined by SEM\uffe2\uff80\uff93EDX scanning. The healing ratio was evaluated by comparing (1) the repair rate of the crack area and (2) by capillary water absorption and sorptivity index\uffe2\uff80\uff94before and after incubation. The results indicated that bacteria-doped specimens (bio-mortar) exhibited the most efficient crack-healing in all incubation conditions i.e. different chemical exposure classes. In the pH neutral soil, the average healing ratios for the control and bio-mortar specimens were 38% and 82%, respectively. However, the healing ratio decreased by 43% for specimens incubated in acidic soil (pH\uffe2\uff80\uff89\uffe2\uff89\uff88\uffe2\uff80\uff894) compared with specimens incubated in neutral soil (pH\uffe2\uff80\uff89\uffe2\uff89\uff88\uffe2\uff80\uff897). The study implies that bio self-healing is generally beneficial for concrete embedded within soil; however, aggressive ground conditions can inhibit the healing process.</p>", "keywords": ["Mechanics of Materials", "Self-healing", "0211 other engineering and technologies", "General Materials Science", "Building and Construction", "Soil pH", "02 engineering and technology", "6. Clean water", "Civil and Structural Engineering"]}, "links": [{"href": "https://doi.org/10.1617/s11527-021-01690-1"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Materials%20and%20Structures", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1617/s11527-021-01690-1", "name": "item", "description": "10.1617/s11527-021-01690-1", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1617/s11527-021-01690-1"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-04-01T00:00:00Z"}}, {"id": "10.31224/osf.io/r8xau", "type": "Feature", "geometry": null, "properties": {"updated": "2026-10-06T16:19:27Z", "type": "Journal Article", "created": "2021-09-02", "title": "Multi-Axial Hybrid Fire Testing based on Dynamic Relaxation", "description": "<p>This technical note presents the experimental validation of a hybrid fire testing coordination algorithm recently developed by some of the authors. For the first time, the algorithm is applied to solve the static response of a multiple-degrees-of-freedom hybrid model.</p>", "keywords": ["Coordination algorithms", "Fire test", "Dynamic relaxation", "Computer science", "bepress|Engineering", "General Physics and Astronomy", "02 engineering and technology", "0201 civil engineering", "Control theory", "engrXiv|Engineering|Civil and Environmental Engineering", "0202 electrical engineering", " electronic engineering", " information engineering", "General Materials Science", "Safety", " Risk", " Reliability and Quality", "Partitioned time integration", "Hybrid fire testing", "engrXiv|Engineering|Civil and Environmental Engineering|Structural Engineering", "Technical note", "General Chemistry", "Experimental validation", "Hybrid fire testing; Dynamic relaxation; Partitioned time integration", "engrXiv|Engineering", "bepress|Engineering|Civil and Environmental Engineering", "Static response", "bepress|Engineering|Civil and Environmental Engineering|Structural Engineering", "Multi axial", "Hybrid model"]}, "links": [{"href": "https://doi.org/10.31224/osf.io/r8xau"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Fire%20Safety%20Journal", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.31224/osf.io/r8xau", "name": "item", "description": "10.31224/osf.io/r8xau", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.31224/osf.io/r8xau"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-09-02T00:00:00Z"}}, {"id": "10.3389/fmech.2018.00018", "type": "Feature", "geometry": null, "properties": {"updated": "2026-10-06T16:19:30Z", "type": "Journal Article", "created": "2018-11-20", "title": "The Role of Heat Transfer Limitations in Polymer Pyrolysis at the Microscale", "description": "Pyrolysis of synthetic or natural polymers is an important process in many industries such as fire safety, thermal recycling, and biomass power generation. The kinetics of pyrolysis is usually studied by thermogravimetric analysis (TGA), which is based on measuring the mass loss of a microscale sample and measuring the temperature of the surrounding fluid during controlled heating. The literature is rich in TGA measurements, which are often assumed to be governed solely by chemical kinetics. Heat and mass transfer effects, however, can occur when the sample mass is too large. Only a few studies in the literature quantify the threshold for the initial mass, above which heat transfer effects are significant. Here, we systematically analyse the role of heat transfer in TGA measurements, review existing formulations, and provide a novel threshold for the maximum sample mass. We focus on the natural polymer cellulose, a surrogate for biomass, and split the problem into heat transfer within the sample (intraparticle) and between the sample and the fluid (interparticle). Using dimensional analysis we derive two upper bound thresholds for the initial sample mass as a function of heating. One threshold is calculated based on interparticle heat transfer and depends on flow and heating conditions as well as material and fluid properties. The other is calculated based on intraparticle heat transfer and depends on heating conditions and material properties. Both thresholds were validated with measurements and previous studies from the literature. Comparing both thresholds shows that the maximum sample mass in a TGA is dictated by interparticle heat transfer and rapidly reduces with heating rate from 1.8 mg at 10 K/min to 0.15 mg at 50 K/min. These results enable the selection of appropriate sample masses and heating conditions in TGA measurements, which in turn will lead to a better understanding of polymer pyrolysis.", "keywords": ["TGA", "thermal lag", "Mechanical Engineering", "02 engineering and technology", "0915 Interdisciplinary Engineering", "chemistry", "7. Clean energy", "Industrial and Manufacturing Engineering", "cellulose", "Computer Science Applications", "0201 civil engineering", "12. Responsible consumption", "kinetics", "13. Climate action", "transport", "TJ1-1570", "General Materials Science", "Mechanical engineering and machinery", "0204 chemical engineering", "0913 Mechanical Engineering"], "contacts": [{"organization": "Richter, F, Rein, G,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.3389/fmech.2018.00018"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Frontiers%20in%20Mechanical%20Engineering", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.3389/fmech.2018.00018", "name": "item", "description": "10.3389/fmech.2018.00018", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.3389/fmech.2018.00018"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2018-11-20T00:00:00Z"}}, {"id": "20.500.11850/510230", "type": "Feature", "geometry": null, "properties": {"updated": "2026-10-06T16:22:49Z", "type": "Journal Article", "created": "2021-09-02", "title": "Multi-Axial Hybrid Fire Testing based on Dynamic Relaxation", "description": "<p>This technical note presents the experimental validation of a hybrid fire testing coordination algorithm recently developed by some of the authors. For the first time, the algorithm is applied to solve the static response of a multiple-degrees-of-freedom hybrid model.</p>", "keywords": ["Coordination algorithms", "Fire test", "Dynamic relaxation", "Computer science", "bepress|Engineering", "General Physics and Astronomy", "02 engineering and technology", "0201 civil engineering", "Control theory", "engrXiv|Engineering|Civil and Environmental Engineering", "0202 electrical engineering", " electronic engineering", " information engineering", "General Materials Science", "Safety", " Risk", " Reliability and Quality", "Partitioned time integration", "Hybrid fire testing", "engrXiv|Engineering|Civil and Environmental Engineering|Structural Engineering", "Technical note", "General Chemistry", "Experimental validation", "Hybrid fire testing; Dynamic relaxation; Partitioned time integration", "engrXiv|Engineering", "bepress|Engineering|Civil and Environmental Engineering", "Static response", "bepress|Engineering|Civil and Environmental Engineering|Structural Engineering", "Multi axial", "Hybrid model"]}, "links": [{"href": "https://doi.org/20.500.11850/510230"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Fire%20Safety%20Journal", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "20.500.11850/510230", "name": "item", "description": "20.500.11850/510230", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/20.500.11850/510230"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-09-02T00:00:00Z"}}], "links": [{"rel": "self", "type": "application/geo+json", "title": "This document as GeoJSON", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items?keywords=General+Materials+Science&f=json", "hreflang": "en-US"}, {"rel": "alternate", "type": "text/html", "title": "This document as HTML", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items?keywords=General+Materials+Science&f=html", "hreflang": "en-US"}, {"rel": "collection", "type": "application/json", "title": "Collection URL", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main", "hreflang": "en-US"}, {"type": "application/geo+json", "rel": "first", "title": "items (first)", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items?keywords=General+Materials+Science&", "hreflang": "en-US"}, {"rel": "last", "type": "application/geo+json", "title": "items (last)", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items?keywords=General+Materials+Science&offset=8", "hreflang": "en-US"}], "numberMatched": 8, "numberReturned": 8, "distributedFeatures": [], "timeStamp": "2026-11-22T19:13:29.407938Z"}