Boreal forest regions, including East Siberia, have experienced elevated fire activity in recent years, leading to record\uffe2\uff80\uff90breaking greenhouse gas emissions and severe air pollution. However, our understanding of the factors that eventually halt fire spread and thus limit fire growth remains incomplete, hindering our ability to model their dynamics and predict their impacts. We investigated the locations and timing of 2.2 million fire stops\uffe2\uff80\uff94defined as 300\uffe2\uff80\uff89m unburned pixels along fire perimeters\uffe2\uff80\uff94across the vast East Siberian taiga. Fire stops were retrieved from remote sensing data covering over 27,000 individual fires that collectively burned 80 Mha between 2012 and 2022. Several geospatial datasets, including hourly fire weather data and landscape variables, were used to identify the factors contributing to individual fire stops. Our analysis attributed 87% of all fire stops to a statistically significant (p\uffe2\uff80\uff89<\uffe2\uff80\uff890.01) change in one or more of these drivers, with fire\uffe2\uff80\uff90weather drivers limiting fire growth over time and landscape drivers constraining it across space. We found clear regional and temporal variations in the importance of these drivers. For instance, landscape drivers\uffe2\uff80\uff94such as less flammable land cover and the presence of roads\uffe2\uff80\uff94were key constraints on fire growth in southeastern Siberia, where the landscape is more populated and fragmented. In contrast, fire weather was the primary constraint on fire growth in the remote northern taiga. Additionally, in central Yakutia, a major fire hotspot in recent years, fuel limitations from previous fires increasingly restricted fire spread. The methodology we present is adaptable to other biomes and can be applied globally, providing a framework for future attribution studies on global fire growth limitations. In northeast Siberia, we found that with increasing droughts and heatwaves, remote northern fires could potentially grow even larger in the future, with major implications for the global carbon cycle and climate.Phononic structures with unit cells exhibiting Bragg scattering and local resonance present unique wave propagation properties at wavelengths well below the regime corresponding to bandgap generation based on spatial periodicity. However, both mechanisms show certain constraints in designing systems with wide bandgaps in the low-frequency range. To face the main practical challenges encountered in such cases, including heavy oscillating masses, a simple dynamic directional amplification (DDA) mechanism is proposed as the base of the phononic lattice. This amplifier is designed to present the same mass and use the same damping element as a reference two-dimensional (2D) phononic metamaterial. Thus, no increase in the structure mass or the viscous damping is needed. The proposed DDA can be realized by imposing kinematic constraints to the structure\uffe2\uff80\uff99s degrees of freedom (DoF), improving inertia and damping on the desired direction of motion. Analysis of the 2D lattice via Bloch\uffe2\uff80\uff99s theory is performed, and the corresponding dispersion relations are derived. The numerical results of an indicative case study show significant improvements and advantages over a conventional phononic structure, such as broader bandgaps and increased damping ratio. Finally, a conceptual design indicates the usage of the concept in potential applications, such as mechanical filters, sound and vibration isolators, and acoustic waveguides.
", "keywords": ["phononic", "metamaterials", "damping", "13. Climate action", "0103 physical sciences", "02 engineering and technology", "0210 nano-technology", "7. Clean energy", "01 natural sciences", "dynamic directional amplifier", "Article"]}, "links": [{"href": "http://www.mdpi.com/1996-1944/14/9/2302/pdf"}, {"href": "https://www.mdpi.com/1996-1944/14/9/2302/pdf"}, {"href": "https://doi.org/10.3390/ma14092302"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Materials", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.3390/ma14092302", "name": "item", "description": "10.3390/ma14092302", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.3390/ma14092302"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-04-29T00:00:00Z"}}, {"id": "11572/255256", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:21:56Z", "type": "Journal Article", "created": "2019-09-23", "title": "Elastica catastrophe machine: theory, design and experiments", "description": "Open Access31 pages, 18 figures", "keywords": ["Nonlinear mechanics; Snap mechanisms; Structural instability", "0203 mechanical engineering", "FOS: Physical sciences", "02 engineering and technology", "Chaotic Dynamics (nlin.CD)", "Nonlinear Sciences - Chaotic Dynamics", "0210 nano-technology"]}, "links": [{"href": "https://iris.unitn.it/bitstream/11572/255256/1/1-s2.0-S002250961930523X-main.pdf"}, {"href": "https://doi.org/11572/255256"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20the%20Mechanics%20and%20Physics%20of%20Solids", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "11572/255256", "name": "item", "description": "11572/255256", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/11572/255256"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2020-03-01T00:00:00Z"}}, {"id": "11586/524923", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:21:58Z", "type": "Journal Article", "created": "2024-12-03", "title": "Addressing the environmental sustainability of plastics used in agriculture: a multi-actor perspective", "description": "AbstractPlastics used in agriculture, commonly known as agriplastics (AP), offer numerous advantages in terrestrial agriculture, forestry, fisheries and aquaculture, but the diffusion of AP-intensive practices has led to extensive pollution. This review aims to synthesise scientific and policy discussions surrounding AP, examining evidence of their benefits and detrimental environmental and agricultural impacts. Following the proposal of a preliminary general taxonomy of AP, this paper presents the findings from a survey conducted among international experts from the plastic industry, farmer organisations, NGOs and environmental research institutes. This analysis highlights knowledge gaps, demands and perspectives for the sustainable future use of AP. Stakeholder positions vary on the options of \uffe2\uff80\uff98rejection\uffe2\uff80\uff99 or \uffe2\uff80\uff98reduction\uffe2\uff80\uff99 of AP, as well as the role of alternative materials such as (bio)degradable and compostable plastics. However, there is consensus on critical issues such as redesign, labelling, traceability, environmental safety standards, deployment and retrieval standards, as well as innovative waste management approaches. All stakeholders express concern for the environment. A \uffe2\uff80\uff98best practice\uffe2\uff80\uff99-based circular model was elaborated capturing these perspectives. In the context of global food systems increasingly reliant on AP, scientists emphasise the need to simultaneously preserve nature-based and traditional knowledge-based sustainable agricultural practices to enhance food system resilience.Current estimations of the climate impact from indirect land use change (ILUC) caused by biofuels are heavily influenced by assumptions regarding the biofuel production period. The purpose of this paper is to propose a new method (baseline time accounting) that takes global land use dynamics into account that is consistent with the global warming potential, that is applicable to any phenomenon causing land use change, and that is independent of production period assumptions.
MethodsWe consider ILUC in two forms. The first is called \uffe2\uff80\uff9caccelerated expansion\uffe2\uff80\uff9d and concerns ILUC in regions with an expanding agricultural area. The second is called \uffe2\uff80\uff9cdelayed reversion\uffe2\uff80\uff9d and concerns ILUC in regions with a decreasing agricultural area. We use recent trends in international land use and projections of future land use change to assess how ILUC from biofuels will alter the development in global agricultural land use dynamics compared to the existing trend (i.e., the baseline development). We then use the definition of the global warming potential to determine the CO2 equivalence of the change in land use dynamics.
Results and discussionWe apply baseline time accounting to two existing ILUC studies in the literature. With current trends in global agricultural land use, the method significantly reduces the estimated climate impact in the previous ILUC studies (by more than half). Sensitivity analyses show that results are somewhat sensitive to assumptions regarding carbon sequestration and assumptions regarding postreversion ecosystems.
ConclusionsThe global dynamic development in land use has important implications for the time accounting step when estimating the climate impact of ILUC caused by biofuel production or other issues affecting land use. Ignoring this may lead to erroneous conclusions about the actual climate impact of ILUC. Several land use projections indicate that the global agricultural area will keep expanding up to and beyond 2050. We therefore recommend to apply the baseline time accounting concept as an integrated part of future ILUC studies and to update the results on a regular basis.
", "keywords": ["2. Zero hunger", "Environmental Science(all)", "13. Climate action", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "15. Life on land", "01 natural sciences", "7. Clean energy", "0105 earth and related environmental sciences"], "contacts": [{"organization": "Steffen Mueller, Jesper Hedal Kl\u00f8verpris,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1007/s11367-012-0488-6"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/The%20International%20Journal%20of%20Life%20Cycle%20Assessment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1007/s11367-012-0488-6", "name": "item", "description": "10.1007/s11367-012-0488-6", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1007/s11367-012-0488-6"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2012-09-11T00:00:00Z"}}, {"id": "10.1007/s11367-012-0500-1", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:14:50Z", "type": "Journal Article", "created": "2012-09-19", "title": "Life Cycle Assessment In Green Chemistry: Overview Of Key Parameters And Methodological Concerns", "description": "Several articles within the area of green chemistry often promote new techniques or products as \u2018green\u2019 or \u2018more environmentally benign\u2019 than their conventional counterpart although these articles often do not quantitatively assess the environmental performance. In order to do this, life cycle assessment (LCA) is a valuable methodology. However, on the planning stage, a full-scale LCA is considered to be too time consuming and complicated. Two reasons for this have been recognised, the method is too comprehensive and it is hard to find inventory data. In this review, key parameters are presented with the purpose to reduce the time-consuming steps in LCA. In this review, several LCAs of so-called \u2018green chemicals\u2019 are analysed and key parameters and methodological concerns are identified. Further, some conclusions on the environmental performance of chemicals were drawn. For fossil-based platform chemicals several LCAs exists but for chemicals produced with industrial biotechnology or from renewable resources the number of LCAs is limited, with the exception of biofuels, for which a large number of studies are made. In the review, a significant difference in the environmental performance of bulk and fine chemicals was identified. The environmental performance of bulk chemicals are closely connected to the production of the raw material and thereby different land use aspects. Here, a lot can be learnt from biofuel LCAs. In many of the reviewed articles focusing on bulk chemicals a comparison regarding fossil and renewable raw material was done. In most of the comparisons the renewable alternative turned out to be more environmentally preferable, especially for the impact on GWP and energy use. However, some environmental concerns were identified as important to include to assess overall environmental concern, for example eutrophication and the use of land. To assess the environmental performance of green chemicals, quantitative methods are needed. For this purpose, both simple metrics and more comprehensive methods have been developed, one recognised method being LCA. However, this method is often too time consuming to be valuable in the process planning stage. This is partly due to a lack of available inventory data, but also because the method itself is too comprehensive. Here, key parameters for the environmental performance and methodological concerns were described to facilitate a faster and simpler use of LCA of green chemicals in the future.", "keywords": ["13. Climate action", "11. Sustainability", "0211 other engineering and technologies", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "7. Clean energy", "6. Clean water", "12. Responsible consumption"]}, "links": [{"href": "https://doi.org/10.1007/s11367-012-0500-1"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/The%20International%20Journal%20of%20Life%20Cycle%20Assessment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1007/s11367-012-0500-1", "name": "item", "description": "10.1007/s11367-012-0500-1", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1007/s11367-012-0500-1"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2012-09-20T00:00:00Z"}}, {"id": "10.1007/s11367-012-0512-x", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:14:50Z", "type": "Journal Article", "created": "2012-10-09", "title": "Life-Cycle Climate Impacts Of Peat Fuel: Calculation Methods And Methodological Challenges", "description": "There has been lively debate, especially in Finland and Sweden, on the climate impacts of peat fuel. Previous studies of peat fuel's life-cycle climate impacts were controversial in their interpretation. The aim of this paper is conclusive examination of the issues of LCA methodology, derived from critical review of previous studies and recalculation based on the latest knowledge of greenhouse gas balances related to peat fuel\u2019s utilisation and the radiative forcing impacts of greenhouse gases. The most recent findings on emissions and the gas fluxes between soil, vegetation and atmosphere were used in calculation of the life-cycle climate impacts of the various peat fuel utilisation chains by means of LCA methodology. In the main, the calculation methods and rules were the same as in the previous studies, with the aim being to distinguish the impact of peat fuel\u2019s utilisation from that of the natural or semi-natural situation. A dynamic method was employed for assessing changes in radiative forcing. The results of alternative peat fuel utilisation chains were compared to the corresponding result for coal. There are many steps in peat fuel LCA, where different assumptions lead to different outcomes. Determining the functional unit, reference situations and system boundaries, as well as the emission calculation methods, is important from this point of view. Determination of the initial reference situation emerged as one of the critical points in the calculations. Time scale can strongly affect the final outcomes in a study where effects of long-term land-use change are considered. Each peatland area is unique. The higher the greenhouse gas emissions in the initial reference situation, the greater is the climate impact of the area and the more suitable the area is for peat extraction. The study showed that more greenhouse gas flux measurements are needed, for better assessment of the climate impacts of different potential peat extraction sites. Climate change mitigation requires quick actions, and uncertainties related to emissions are higher for longer time spans. Therefore, it can be concluded that a perspective spanning more than 100\u00a0years is inappropriate in peat fuel's life-cycle climate impact assessments.", "keywords": ["13. Climate action", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "15. Life on land", "7. Clean energy", "12. Responsible consumption"]}, "links": [{"href": "https://doi.org/10.1007/s11367-012-0512-x"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/The%20International%20Journal%20of%20Life%20Cycle%20Assessment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1007/s11367-012-0512-x", "name": "item", "description": "10.1007/s11367-012-0512-x", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1007/s11367-012-0512-x"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2012-10-10T00:00:00Z"}}, {"id": "10.1016/j.cej.2022.135748", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:19Z", "type": "Journal Article", "created": "2022-03-19", "title": "Evaluating bioelectrochemically-assisted constructed wetland (METland\u00ae) for treating wastewater: Analysis of materials, performance and electroactive communities", "description": "METland\u00ae technology consists of a bioengineering strategy for treating wastewater by integrating microbial electrochemical concepts into constructed wetland systems to enhance pollutants removal. In this context, we have constructed planted (Iris sibirica) biofilters to assess the impact of different electrically conductive bed materials (electroconductive coke, electroconductive biochar, non-electroconductive biochar and gravel) by analyzing the (i) wastewater treatment efficiency (COD and nitrogen removal), (ii) bioelectrochemical response, and (iii) diversity of microbial communities. Electrically conductive materials outperformed non-conductive ones allowing removal rates as high as 175-180 gCOD/bed*m3 day capable to support footprint as low 0.4 m2/pe. In contrast, the highest nitrogen removal rates were achieved with non-conductive biochar in presence of plants (80 %) regardless the anoxic conditions of the assay. This was confirmed by the presence of annamox bacteria like Planctomycetes. Furthermore, the presence of a marked electric potential profile along the bed height in electroconductive materials together with redox pairs (cyclic voltammetry analysis) demonstrated an effective electron flow from bottom to uppermost layers of the bed (geoconductor mechanism). In electroconductive biochar, such effective conductivity-based model co-exists with a geobattery mechanism due to presence of electroactive phenolic and carbonyl/quinone groups and/or microporosity. Microbial biodiversity analysis revealed the impact of plants just at the upper layers of the biofilters where roots and Rhizobium predominate. Bacteria from genus Clostridium were dominant in gravel inert material; in contrast, bacteria from genus Geobacter (12%) and Trichococcus (30%) outcompete the rest of communities for an effective colonization of carbonaceous beds, suggesting their main role as part of the electrosyntrophies mechanism after METland\u00ae.", "keywords": ["Electroactive bacteria", "0301 basic medicine", "0303 health sciences", "Metland\u00ae", "Electroconductive biochar", "Wastewater treatment", "QD Chemistry", "6. Clean water", "Constructed wetland", "03 medical and health sciences", "13. Climate action", "Microbial electrochemistry", "TD Environmental technology. Sanitary engineering", "Qu\u00edmica F\u00edsica"]}, "links": [{"href": "https://doi.org/10.1016/j.cej.2022.135748"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Chemical%20Engineering%20Journal", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.cej.2022.135748", "name": "item", "description": "10.1016/j.cej.2022.135748", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.cej.2022.135748"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2022-07-01T00:00:00Z"}}, {"id": "10.1016/j.ecolecon.2012.12.008", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:22Z", "type": "Journal Article", "created": "2013-02-01", "title": "Transaction Costs Of Carbon Offset Projects: A Comparative Study", "description": "Abstract The land-use change and forestry sector can be a cost-effective contributor to climate mitigation in at least three ways: providing carbon offsets through carbon sequestration in biomass and soils, reducing emissions of methane and other greenhouse gases, and producing biofuels that replace fossil fuels. The presence of carbon markets should help encourage these activities; however, most carbon trades to date have occurred in the energy sector. A major obstacle to carbon trades from land-use systems is the presence of high transaction costs of converting a carbon offset into a tradable commodity, so the prevailing market carbon prices may not provide enough incentive for adoption. This paper presents a model of the exchange of carbon offsets between a project developer and a group of landholders. The model is solved to derive project feasibility frontiers that show the minimum number of contracts necessary to make a project feasible at any given carbon price. The model is applied to two case studies (smallholder agroforestry in Indonesia and partial reforestation of family farms in Australia) under two types of contract (purchase of carbon flows and rental of carbon stocks). The paper concludes by identifying possible strategies to reduce transaction costs while maintaining project integrity.", "keywords": ["13. Climate action", "11. Sustainability", "0211 other engineering and technologies", "02 engineering and technology", "15. Life on land", "7. Clean energy", "01 natural sciences", "12. Responsible consumption", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.ecolecon.2012.12.008"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Ecological%20Economics", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.ecolecon.2012.12.008", "name": "item", "description": "10.1016/j.ecolecon.2012.12.008", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.ecolecon.2012.12.008"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2013-04-01T00:00:00Z"}}, {"id": "10.1016/j.biombioe.2011.04.041", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:15Z", "type": "Journal Article", "created": "2011-06-28", "title": "How To Ensure Greenhouse Gas Emission Reductions By Increasing The Use Of Biofuels? \u2013 Suitability Of The European Union Sustainability Criteria", "description": "Biofuels are promoted in many parts of the world. However, concern of environmental and social problems have grown due to increased production of biofuels. Therefore, many initiatives for sustainability criteria have been announced. As a part of the European Union (EU) renewable energy promotion directive (RED), the EU has introduced greenhouse gas (GHG) emission-saving requirements for biofuels along with the first-ever mandate methodology to calculate the GHG emission reduction. As explored in this paper, the RED methodology, based on life-cycle assessment (LCA) approach, excludes many critical issues. These include indirect impacts due to competition for land, biomass and other auxiliary inputs. Also, timing issues, allocation problems, and uncertainty of individual parameters are not yet considered adequately. Moreover, the default values provided in the RED for the GHG balances of biofuels may significantly underestimate their actual impacts. We conclude that the RED methodology cannot ensure the intended GHG emission reductions of biofuels. Instead, a more comprehensive approach is required along with additional data and indicators. Even if it may be very difficult to verify the GHG emission reductions of biofuels in practice, it is necessary to consider the uncertainties more closely, in order to mitigate climate change effectively.", "keywords": ["life-cycle assessment", "criteria", "02 engineering and technology", "sustainability", "16. Peace & justice", "7. Clean energy", "01 natural sciences", "12. Responsible consumption", "greenhouse gas emission", "Biofuel", "13. Climate action", "11. Sustainability", "and Infrastructure", "SDG 13 - Climate Action", "0202 electrical engineering", " electronic engineering", " information engineering", "SDG 7 - Affordable and Clean Energy", "Innovation", "SDG 12 - Responsible Consumption and Production", "SDG 9 - Industry", "ta218", "0105 earth and related environmental sciences"], "contacts": [{"organization": "Koponen, Kati, Soimakallio, Sampo,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1016/j.biombioe.2011.04.041"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Biomass%20and%20Bioenergy", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.biombioe.2011.04.041", "name": "item", "description": "10.1016/j.biombioe.2011.04.041", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.biombioe.2011.04.041"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2011-08-01T00:00:00Z"}}, {"id": "10.1016/j.eurpolymj.2019.03.002", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:30Z", "type": "Journal Article", "created": "2019-03-05", "title": "Exploring the potential of gas-phase esterification to hydrophobize the surface of micrometric cellulose particles", "description": "In order to lift the barrier of a poor interfacial interaction between cellulosic plant fibers and polymeric matrices in biocomposites, an eco-friendly surface modification of fibers was explored. A solvent-free gas-phase ester-ification applied to cellulose particles allowed to graft palmitoyl moieties on their surface in order to make them more compatible with non-polar polymers for composite applications. The efficiency of the treatment was evidenced from FT-IR analysis, and the degree of substitution (DS) was quantified by solid-state 13 C NMR spectroscopy. The effect of surface grafting on resulting intrinsic characteristics of cellulose particles, i.e. crys-tallinity, thermal stability, morphology, surface free energy and water vapor sorption were investigated respectively by X-ray diffraction, thermogravimetric analysis, SEM observations coupled with image analysis, contact angle measurements and dynamic vapor sorption system (DVS). It was shown that a DS as low as 0.01 was enough to drastically increase the hydrophobicity of cellulose particles without affecting the inner properties of cellulose.", "keywords": ["660", "Degree of substitution", "Surface free energy", "est\u00e9rification", "matrice polym\u00e9rique", "cristallinit\u00e9", "Ing\u00e9nierie des aliments", "Gas-phase esterification", "02 engineering and technology", "[SDV.IDA] Life Sciences [q-bio]/Food engineering", "540", "Water vapor sorption", "01 natural sciences", "Cellulose;Gas-phase esterification;Degree of substitution;Surface free energy;Crystallinity;Water vapor sorption", "sorption de l'eau", "0104 chemical sciences", "[SDV.IDA]Life Sciences [q-bio]/Food engineering", "biomat\u00e9riau", "Food engineering", "fibre cellulosique", "Cellulose", "0210 nano-technology", "Crystallinity"]}, "links": [{"href": "https://doi.org/10.1016/j.eurpolymj.2019.03.002"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/European%20Polymer%20Journal", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.eurpolymj.2019.03.002", "name": "item", "description": "10.1016/j.eurpolymj.2019.03.002", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.eurpolymj.2019.03.002"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2019-06-01T00:00:00Z"}}, {"id": "10.1016/j.cej.2022.138949", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:19Z", "type": "Journal Article", "created": "2022-09-01", "title": "Electrifying secondary settlers to enhance nitrogen and pathogens removals", "description": "Economic options to retrofit wastewater treatment plants (WWTPs) without tertiary treatments need to be explored. In this regard, bioelectrochemical systems (BES) can be hybridized with existing technologies, upgrading the removal performance of original techniques while avoiding replacement costs. Yet, few demonstrations of merged systems have been given. For the first time, in this work it was built a lab-scale model of a BES merged with a secondary settler, namely e-settler, to enhance the polishing performance of already existing WWTPs. In particular, to concomitantly increase nitrogen removal and perform wastewater (WW) disinfection, avoiding further tertiary treatments. In the e-settlers, nitrogen removal was increased through bioelectrochemical stimulation. Concomitant ammonium and nitrate removal without nitrite accumulation and a negligible amount of nitrous oxide emissions were observed. Ti-MMO as anode material showed a high disinfectant action. In conclusion, it was demonstrated how a simple bioelectrochemical set-up can upgrade existing WWTPs. The following step requires the study at a larger scale, identifying optimal operational and structural parameters for the in-situ application. The main limitations of the e-settlers were discussed, linking them to possible solutions that need to be deepened in a lab-scale model of conventional secondary treatments (activated sludge followed by secondary settler) This work was funded through: the ELECTRA project [grant agreement no. 826244], which was financially supported by the Horizon 2020 programme of the European Union; the NSFC-EU Environmental Biotechnology joint program (No. 31861133001); the Key Research and Development Project of Shandong Province (No. 2020CXGC011202). S.P is a Serra H\u00fanter Fellow (UdG-AG-575) and acknowledges the funding from the ICREA Academia award. LEQUiA [2017-SGR-1552] has been recognized as consolidated research group by the Catalan Government Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier", "keywords": ["Sewage -- Purification -- Nitrogen removal", "Bioelectrochemical system; Wastewater; Ammonium; Nitrate; Secondary treatments; Disinfection", "Aig\u00fces residuals -- Plantes de tractament", "Aig\u00fces residuals -- Depuraci\u00f3 -- Desnitrificaci\u00f3", "13. Climate action", "11. Sustainability", "0207 environmental engineering", "02 engineering and technology", "Sewage disposal plants", "01 natural sciences", "6. Clean water", "12. Responsible consumption", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://cris.unibo.it/bitstream/11585/897560/1/Botti%20et%20al_Chemical%20Engineering%20Journal_2023_451-138949.pdf"}, {"href": "https://doi.org/10.1016/j.cej.2022.138949"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Chemical%20Engineering%20Journal", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.cej.2022.138949", "name": "item", "description": "10.1016/j.cej.2022.138949", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.cej.2022.138949"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2023-01-01T00:00:00Z"}}, {"id": "10.1016/j.expthermflusci.2020.110215", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:30Z", "type": "Journal Article", "created": "2020-07-07", "title": "Visualization and measurements of shock waves in cavitating flow", "description": "Abstract Upon cavitation cloud collapse an omnidirectional shock wave is emitted. It then travels through the flow field, causing a cascade of events resulting in erosion, noise, vibration and the cavitation shedding process. Despite that the accumulated data points evidently to the presence of the shock waves, the direct measurements hardly exist - and even then, they are very expensive and time consuming to perform. In the present paper, the possibility of detecting shock waves inside cavitating flow is shown. The methodology bases on using two conventional high speed cameras. With the first one cavitating flow from a distance is observed, determining the position of the wave, while the second camera with a microscopic lens enables a close-up view to determine the number and size change of air bubbles as a shock wave passed them. By calibration and reference measurements the amplitude of the shock waves was determined. This relatively simple approach enabled the first observation of shockwaves which occur at the cavitation cloud collapse (downstream of the attached cavity). Several examples of shock wave dynamics are shown and how they influence the general cavitation cloud behaviour. Shock wave front velocities and local pressure waves caused by cloud collapse were estimated from visualization, reaching values to more than 700 m/s and over 5 MPa respectively.", "keywords": ["kavitacija", "visokofrekven\u010dno snemanje", "0404 agricultural biotechnology", "cavitation", "13. Climate action", "kolaps kavitacijskega oblaka", "shock waves", "cloud collapse", "04 agricultural and veterinary sciences", "udarni valovi", "info:eu-repo/classification/udc/532.528(045)", "0405 other agricultural sciences", "high speed video"]}, "links": [{"href": "https://doi.org/10.1016/j.expthermflusci.2020.110215"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Experimental%20Thermal%20and%20Fluid%20Science", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.expthermflusci.2020.110215", "name": "item", "description": "10.1016/j.expthermflusci.2020.110215", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.expthermflusci.2020.110215"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2020-11-01T00:00:00Z"}}, {"id": "10.1016/j.expthermflusci.2022.110651", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:30Z", "type": "Journal Article", "created": "2022-03-26", "title": "Characterization of jet parameters related to cavitation bubble dynamics in a vicinity of a flat liquid\u2013liquid interface", "description": "Open AccessAbstract.", "keywords": ["mehur\u010dki", "liquid\u2013liquid interface", "04 agricultural and veterinary sciences", "meja med dvema teko\u010dinama", "cavitation", " liquid-liquid interface", " bubbles", " jet", " anisotropy parameter", "bubbles", "kavitacija", "curek teko\u010dine", "info:eu-repo/classification/udc/532.528", "kavitacija", " meja med dvema teko\u010dinama", " mehur\u010dki", " curek teko\u010dine", " anizotropi\u010dni parameter", "anisotropy parameter", "0404 agricultural biotechnology", "cavitation", "jet", "info:eu-repo/classification/udc/532", "anizotropi\u010dni parameter", "0405 other agricultural sciences"], "contacts": [{"organization": "Orthaber, Uro\u0161, Dular, Matev\u017e, Petkov\u0161ek, Rok,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1016/j.expthermflusci.2022.110651"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Experimental%20Thermal%20and%20Fluid%20Science", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.expthermflusci.2022.110651", "name": "item", "description": "10.1016/j.expthermflusci.2022.110651", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.expthermflusci.2022.110651"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2022-08-01T00:00:00Z"}}, {"id": "10.1016/j.soildyn.2017.09.005", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:16:14Z", "type": "Journal Article", "created": "2017-09-23", "title": "A centrifuge-based experimental verification of Soil-Structure Interaction effects", "description": "Open AccessSoil Dynamics and Earthquake Engineering, 103", "keywords": ["2. Zero hunger", "Soil structure interaction; Centrifuge modeling; Experimental verification; Impulse response; SDOF systems; Modal identification; Energy dissipation", "Soil structure interaction", "Impulse response", "Energy dissipation", "Centrifuge modeling", "SDOF systems", "0211 other engineering and technologies", "Experimental verification", "02 engineering and technology", "15. Life on land", "Modal identification", "0201 civil engineering"]}, "links": [{"href": "https://doi.org/10.1016/j.soildyn.2017.09.005"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Soil%20Dynamics%20and%20Earthquake%20Engineering", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.soildyn.2017.09.005", "name": "item", "description": "10.1016/j.soildyn.2017.09.005", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.soildyn.2017.09.005"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-12-01T00:00:00Z"}}, {"id": "10.1016/j.scitotenv.2014.11.004", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:59Z", "type": "Journal Article", "created": "2014-11-20", "title": "Impacts Of Lucc On Soil Properties In The Riparian Zones Of Desert Oasis With Remote Sensing Data: A Case Study Of The Middle Heihe River Basin, China", "description": "Large-scale changes in land use and land cover over long timescales can induce significant variations in soil physicochemical properties, particularly in the riparian zones of arid regions. Frequent reclamation of wetlands and grasslands and intensive agricultural activity have induced significant changes in both land use/cover and soil physicochemical properties in the riparian zones of the middle Heihe River basin of China. The present study aims to explore whether land use/land cover change (LUCC) can well explain the variations in soil properties in the riparian zones of the middle Heihe River basin. To achieve this, we mapped LUCC and quantified the type of land use change using remote sensing images, topographic maps, and GIS analysis techniques. Forty-two sites were selected for soil and vegetation sampling. Then, physical and chemical experiments were employed to determine soil moisture, soil bulk density, soil pH, soil organic carbon, total nitrogen, total potassium, total phosphorous, available nitrogen, available potassium, and available phosphorous. The Independent-Samples Kruskal-Wallis Test, principal component analysis, and a scatter matrix were used to analyze the effects of LUCC on soil properties. The results indicate that the majority of the parameters investigated were affected significantly by LUCC. In particular, soil moisture and soil organic carbon can be explained well by land cover change and land use change, respectively. Furthermore, changes in soil moisture could be attributed primarily to land cover changes. Changes in soil organic carbon were correlated closely with the following land use change types: wetlands-arable, forest-grasslands, and grasslands-desert. Other parameters, including pH and total K, were also found to exhibit significant correlations with LUCC. However, changes in soil nutrients were shown to be induced most probably by human agricultural activity (i.e. fertilize, irrigation, tillage, etc.), rather than by simple conversions from one land use/cover types to the others.", "keywords": ["2. Zero hunger", "China", "Conservation of Natural Resources", "Nitrogen", "Urbanization", "Agriculture", "Phosphorus", "04 agricultural and veterinary sciences", "Environment", "15. Life on land", "01 natural sciences", "6. Clean water", "3. Good health", "Soil", "Rivers", "13. Climate action", "Remote Sensing Technology", "0401 agriculture", " forestry", " and fisheries", "Desert Climate", "Ecosystem", "Environmental Monitoring", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.scitotenv.2014.11.004"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Science%20of%20The%20Total%20Environment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.scitotenv.2014.11.004", "name": "item", "description": "10.1016/j.scitotenv.2014.11.004", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.scitotenv.2014.11.004"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2015-02-01T00:00:00Z"}}, {"id": "10.1016/j.scitotenv.2018.11.010", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:16:00Z", "type": "Journal Article", "created": "2018-11-03", "title": "\u03b415N of lichens reflects the isotopic signature of ammonia source", "description": "Although it is generally accepted that \u03b415N in lichen reflects predominating N isotope sources in the environment, confirmation of the direct correlation between lichen \u03b415N and atmospheric \u03b415N is still missing, especially under field conditions with most confounding factors controlled. To fill this gap and investigate the response of lichens with different tolerance to atmospheric N deposition, thalli of the sensitive Evernia prunastri and the tolerant Xanthoria parietina were exposed for ten weeks to different forms and doses of N in a field manipulation experiment where confounding factors were minimized. During this period, several parameters, namely total N, \u03b415N and chlorophyll a fluorescence, were measured. Under the experimental conditions, \u03b415N in lichens quantitatively responded to the \u03b415N of released gaseous ammonia (NH3). Although a high correlation between the isotopic signatures in lichen tissue and supplied N was found both in tolerant and sensitive species, chlorophyll a fluorescence indicated that the sensitive species very soon lost its photosynthetic functionality with increasing N availability. The most damaging response to the different N chemical forms was observed with dry deposition of NH3, although wet deposition of ammonium ions had a significant observable physiological impact. Conversely, there was no significant effect of nitrate ions on chlorophyll a fluorescence, implying differential sensitivity to dry deposition versus wet deposition and to ammonium versus nitrate in wet deposition. Evernia prunastri was most sensitive to NH3, then NH4+, with lowest sensitivity to NO3-. Moreover, these results confirm that lichen \u03b415N can be used to indicate the \u03b415N of atmospheric ammonia, providing a suitable tool for the interpretation of the spatial distribution of NH3 sources in relation to their \u03b415N signal.", "keywords": ["Air Pollutants", "Nitrates", "Lichens", "Nitrogen Isotopes", "Chlorophyll A", "0211 other engineering and technologies", "02 engineering and technology", "Models", " Theoretical", "chlorophyll a fluorescence", "01 natural sciences", "nitrogen deposition", "Xanthoria parietina", "Species Specificity", "Ammonia", "13. Climate action", "source spatial distribution", "biomonitoring", "physiological response", "Photosynthesis", "Environmental Monitoring", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.scitotenv.2018.11.010"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Science%20of%20The%20Total%20Environment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.scitotenv.2018.11.010", "name": "item", "description": "10.1016/j.scitotenv.2018.11.010", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.scitotenv.2018.11.010"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2019-02-01T00:00:00Z"}}, {"id": "10.1007/s10853-014-8308-y", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:14:39Z", "type": "Journal Article", "created": "2014-05-22", "title": "Review: the characterization of electrospun nanofibrous liquid filtration membranes", "description": "Electrospun nanofibrous membranes (ENMs) are used in a variety of applications, including sensors, tissue engineering, air filtration, energy, and reinforcement in composite materials. Recently, they have gained an interest in the field of liquid filtration. The membranes, surface, bulk, and overall architecture play an important role in the filtration properties and hence the right characterization technique needs to be established, which will pave the way for future developments in the field of filtration. In this article, we have reviewed the recent advances in ENMs for liquid separation application.", "keywords": ["02 engineering and technology", "0210 nano-technology", "01 natural sciences", "3. Good health", "0104 chemical sciences"]}, "links": [{"href": "https://doi.org/10.1007/s10853-014-8308-y"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Materials%20Science", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1007/s10853-014-8308-y", "name": "item", "description": "10.1007/s10853-014-8308-y", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1007/s10853-014-8308-y"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2014-05-23T00:00:00Z"}}, {"id": "10.1016/j.agwat.2021.106827", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:08Z", "type": "Journal Article", "created": "2021-02-27", "title": "Implementing a new texture-based soil evaporation reduction coefficient in the FAO dual crop coefficient method", "description": "Abstract Crop evapotranspiration (ET) is a fundamental component of the hydrological cycle, especially in arid/semi-arid regions. The FAO-56 offers an operational method for deriving ET from the reduction (dual crop coefficient Kc) of the atmospheric evaporative demand (ET0). The dual coefficient approach (FAO-2Kc) is intended to improve the daily estimation of ET by separating the contribution of bare soil evaporation (E) and crop transpiration components. The FAO-2Kc has been a well-known reference for the operational monitoring of crop water needs. However, its performance for estimating the water use efficiency is limited by uncertainties in the modeled evaporation/transpiration partitioning. This paper aims at improving the soil module of the FAO-2Kc by modifying the E reduction coefficient (Kr) according to soil texture information and state-of-the-art formulations, hence, to amend the mismatch between FAO-2Kc and field-measured data beyond standard conditions. In practice this work evaluates the performance of two evaporation models, using the classical Kr (Kr,FAO) and a new texture-based Kr (Kr,text) over 33 bare soil sites under different evaporative demand and soil conditions. An offline validation is investigated by forcing both models with observed soil moisture ( \u03b8 s ) data as input. The Kr,text methodology provides more accurate E estimations compared to the Kr,FAO method and systematically reduces biases. Using Kr,text allows reaching the lowest root means square error (RMSE) of 0.16\u2009mm/day compared to the Kr,FAO where the lowest RMSE reached is 0.88\u2009mm/day. As a step further in the assessment of the proposed methodology, ET was estimated in three wheat fields across the entire agricultural season. Both approaches were thus inter-compared in terms of ET estimates forced by SM estimated as a residual of the water balance model (online validation). Compared to ET measurements, the new formulation provided more accurate results. The RMSE was 0.66\u2009mm/day (0.71\u2009mm/day) and the R2 was 0.83 (0.78) for the texture-based (classical) Kr.", "keywords": ["0106 biological sciences", "2. Zero hunger", "570", "Evapotranspiration", "Soil texture", "FAO-2Kc", "0207 environmental engineering", "Soil moisture", "02 engineering and technology", "15. Life on land", "Soil evaporation", "01 natural sciences", "6. Clean water"]}, "links": [{"href": "https://doi.org/10.1016/j.agwat.2021.106827"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Agricultural%20Water%20Management", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.agwat.2021.106827", "name": "item", "description": "10.1016/j.agwat.2021.106827", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.agwat.2021.106827"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2021-05-01T00:00:00Z"}}, {"id": "10.1016/j.agee.2017.06.003", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:04Z", "type": "Journal Article", "created": "2017-06-10", "title": "Effects Of Shade-Tree Species And Spacing On Soil And Leaf Nutrient Concentrations In Cocoa Plantations At 8 Years After Establishment", "description": "Intercropping in agroforestry systems improves ecosystem services. Appropriate species compositions and spacing regimes are critical to achieve ecosystem benefits and improve yields of all the component crops. Cocoa (Theobroma cacao) is an important cash crop globally but it requires shade for survival and growth. However, the effects of shade-tree species composition and spacing regime on nutrient cycling in cocoa plantations are not well understood. This study investigated the effects of shade tree species and spacing regimes on soil and plant nutrient availability at 8 years after plantation establishment in Papua New Guinea. Three cocoa intercropping systems were established in which T. cacao was planted with either a non-legume timber tree, Canarium indicum, or a legume non-timber tree, Gliricidia sepium. The shade-tree spacing regimes included either 8 m \u00d7 16 m or 8 m \u00d7 8 m in the Theobroma + Canarium plantations. There was an ongoing thinning regime in the Theobroma + Gliricidia plantation, with a final shade-tree spacing of 12 m \u00d7 12 m. Soil total carbon (TC) and total nitrogen (TN) were significantly higher in the Theobroma + Gliricidia plantation with 12 m \u00d7 12 m spacing and the Theobroma + Canarium plantation with 8 m \u00d7 16 m spacing than in the Theobroma + Canarium plantation with 8 m \u00d7 8 m spacing. Foliar TN and P were correlated with soil TN and P, respectively, whereas no correlation was detected between soil and leaf K concentrations. Foliar TN, P and K were under ideal concentrations for T. cacao in all of the plantations. The Theobroma + Gliricidia plantation had higher soil water extractable phosphorus (P) than the two Theobroma + Canarium plantations, probably due to frequent pruning of the G. sepium trees. Foliar C isotope composition (\u03b413C) of T. cacao suggested that T. cacao close to G. sepium or close to C. indicum with spacing of 8 m \u00d7 16 m and 8 m \u00d7 8 m had similar light interception. However, increased C. indicum spacing increased the light interception of T. cacao trees that were not planted next to C. indicum. This study indicated that non-legume timber trees with an optimized spacing regime can be used as overstorey shade trees for T. cacao. However, our study indicated all three plantations required fertilisation and better nutrient management.", "keywords": ["571", "stable isotopes", "FoR 16 (Studies in Human Society)", "Canarium indicum", "Soil fertility", "Gliricidia sepium", "333", "630", "Papua New Guinea", "veterinary and food sciences", "Stable isotopes", "2. Zero hunger", "Field organic and low chemical input horticulture", "Agricultural", "Science & Technology", "Multidisciplinary", "Ecology", "soil fertility", "FoR 07 (Agricultural and Veterinary Sciences)", "Human society", "Agriculture", "04 agricultural and veterinary sciences", "15. Life on land", "Environmental sciences", "260516 Tropical fruit", "gliricidia sepium", "Intercropping", "070501 Agroforestry", "0401 agriculture", " forestry", " and fisheries", "FoR 05 (Environmental Sciences)", "intercropping", "Life Sciences & Biomedicine"]}, "links": [{"href": "https://doi.org/10.1016/j.agee.2017.06.003"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Agriculture%2C%20Ecosystems%20%26amp%3B%20Environment", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.agee.2017.06.003", "name": "item", "description": "10.1016/j.agee.2017.06.003", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.agee.2017.06.003"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-08-01T00:00:00Z"}}, {"id": "10.1016/j.envpol.2017.12.116", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:29Z", "type": "Journal Article", "created": "2018-01-11", "title": "Pharmaceutical concentration variability at sewage treatment plant outlets dominated by hydrology and other factors", "description": "A study was conducted in which the effluent at four small to medium sized sewage treatment plants (STP) in North Rhine-Westphalia, Germany was monitored for three pharmaceutical compounds (carbamazepine, diclofenac, metoprolol) over a period of four years. Grab sampling and auto sampling campaigns were accomplished with respect to various weather conditions in the catchment area. Flow volumes and hydraulic retention times (HRT) from various sampling dates which provide information on processes causing emission changes were additionally taken into account. Monitoring results showed that concentration scattering in the effluent is related to HRT in the sewage treatment plants. Dilution effects following rain events in the catchment area were analysed for the three investigated substances. Short-term emission changes explained by dilution only could be well determined by the mathematical relation between discharge and concentration, and for carbamazepine to be solely determined by the dilution effects at all HRTs. For metoprolol, a clear decrease in concentrations was observed at HRTs above 80\u202fh, and a significant contribution of biodegradation was supported by independent biodegradation tests. For three out of the four STPs, a decrease in concentrations of diclofenac was observed at hydraulic retention times above 80\u202fh, indicating removal, whereas the relationship between concentration and HRT of the other STP could be explained by dilution only. The study shows that emissions can vary with weather conditions, hampering the assessment of emissions and estimation of concentrations in surface waters from generic removal rates only. Furthermore, it illustrates the importance of HRT of rather stable substances in wastewater treatment.", "keywords": ["Diclofenac", "Sewage", "Dilution effects", "Rain", "0211 other engineering and technologies", "02 engineering and technology", "Wastewater", "Waste Disposal", " Fluid", "01 natural sciences", "6. Clean water", "Sewage treatment plants", "12. Responsible consumption", "Biodegradation", " Environmental", "Carbamazepine", "Pharmaceutical Preparations", "13. Climate action", "Germany", "Hydraulic retention times", "Pharmaceuticals", "Hydrology", "Short term emission dynamics", "Water Pollutants", " Chemical", "Environmental Monitoring", "Metoprolol", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.envpol.2017.12.116"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Environmental%20Pollution", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.envpol.2017.12.116", "name": "item", "description": "10.1016/j.envpol.2017.12.116", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.envpol.2017.12.116"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2018-04-01T00:00:00Z"}}, {"id": "10.1016/j.envpol.2020.114002", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:29Z", "type": "Journal Article", "created": "2020-01-21", "title": "Elucidating biotransformation pathways of ofloxacin in lettuce (Lactuca sativa L)", "description": "Antibiotics can be uptaken by plants from soil desorption or directly from irrigation water, but their metabolization pathways in plants are largely unknown. In this paper, an analytical workflow based on high-resolution mass spectrometry was applied for the systematic identification of biotransformation products of ofloxacin in lettuce. The targeted metabolites were selected by comparing the mass chromatograms of exposed with control samples using an advanced spectra-processing method (Fragment Ion Search). The innovative methodology presented allowed us to identify a total of 11 metabolites, including 5 ofloxacin metabolites that are being reported for the first time in plants. Accordingly, major transformation pathways were proposed revealing insight into how ofloxacin and related chemicals are metabolized in lettuce. Furthermore, the influence of biotransformation on potential residual antimicrobial activity of identified compounds was discussed. Human exposure to antibiotics at doses below the minimum inhibitory concentrations is crucial in human risk assessment, including food ingestion; however, in the case of ofloxacin presented results reveal that plant metabolites should also be considered so as not to underestimate their risk.", "keywords": ["High-resolution mass spectrometry", "Ofloxacin", "0211 other engineering and technologies", "02 engineering and technology", "Biotransformation pathways", "01 natural sciences", "6. Clean water", "Anti-Bacterial Agents", "Antibiotics", "Humans", "Plant metabolites", "Biotransformation", "Lactuca", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://doi.org/10.1016/j.envpol.2020.114002"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Environmental%20Pollution", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.envpol.2020.114002", "name": "item", "description": "10.1016/j.envpol.2020.114002", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.envpol.2020.114002"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2020-05-01T00:00:00Z"}}, {"id": "10.1016/j.foodres.2018.01.020", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:15:33Z", "type": "Journal Article", "created": "2018-01-12", "title": "The impact of newly produced protein and dietary fiber rich fractions of yellow pea ( Pisum sativum L.) on the structure and mechanical properties of pasta-like sheets", "description": "Two fractions from pea (Pisum sativum L.), protein isolate (PPI) and dietary fiber (PF), were newly produced by extraction-fractionation method and characterized in terms of particle size distribution and structural morphology using SEM. The newly produced PPI and PF fractions were processed into pasta-like sheets with varying protein to fiber ratios (100/0, 90/10, 80/20, 70/30 and 50/50, respectively) using high temperature compression molding. We studied protein polymerization, molecular structure and protein-fiber interactions, as well as mechanical performance and cooking characteristics of processed PPI-PF blends. Bi-modal particle size distribution and chemical composition of the PPI and PF fractions influenced significantly the physicochemical properties of the pasta-like sheets. Polymerization was most pronounced for the 100 PPI, 90/10 and 80/20 PPI-PF samples as studied by SE-HPLC, and polymerization decreased with addition of the PF fraction. The mechanical properties, as strength and extensibility, were likewise the highest for the 100 PPI and 90/10 PPI-PF blends, while the E-modulus was similar for all the studied blends (around 38\u202fMPa). The extensibility decreased with the increasing amount of PF in the blend. The highest amounts of \u03b2-sheets were found in the pasta-like sheets with high amounts of PPI (100, 90 and 80%), by FT-IR. An increase in PF fraction in the blend, resulted into the high amounts of unordered structures as observed by FT-IR, as well as in an increase in the molecular scattering distances observed by SAXS. The water uptake increased and cooking loss decreased with increased proportions of the PF fraction, and the consistency of 10\u202fmin cooked pasta-like sheets were alike al dente texture. The new knowledge obtained in this study on the use of extraction-fractionation method to produce novel PPI and PF fractions for developing innovative high nutritious food can be of a great importance. The obtained knowledge on the pea protein and fiber processing behaviour could greatly contribute to a better control of functional properties of various temperature-processed products from yellow pea.", "keywords": ["Dietary Fiber", "2. Zero hunger", "Hot Temperature", "Food Handling", "Protein Conformation", "04 agricultural and veterinary sciences", "Plant Proteins", " Dietary", "Polymerization", "Structure-Activity Relationship", "0404 agricultural biotechnology", "Functional Food", "Elastic Modulus", "Scattering", " Small Angle", "Spectroscopy", " Fourier Transform Infrared", "Carbohydrate Conformation", "Chromatography", " Gel", "Dietary Carbohydrates", "Microscopy", " Electron", " Scanning", "Cooking", "Particle Size", "Nutritive Value", "Chromatography", " High Pressure Liquid", "Pisum sativum"]}, "links": [{"href": "https://doi.org/10.1016/j.foodres.2018.01.020"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Food%20Research%20International", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1016/j.foodres.2018.01.020", "name": "item", "description": "10.1016/j.foodres.2018.01.020", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1016/j.foodres.2018.01.020"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2018-04-01T00:00:00Z"}}, {"id": "PMC11468586", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:24:20Z", "type": "Journal Article", "created": "2021-09-08", "title": "Wafer\u2010Scale Functional Metasurfaces for Mid\u2010Infrared Photonics and Biosensing", "description": "AbstractMetasurfaces have emerged as a breakthrough platform for manipulating light at the nanoscale and enabling on\uffe2\uff80\uff90demand optical functionalities for next\uffe2\uff80\uff90generation biosensing, imaging, and light\uffe2\uff80\uff90generating photonic devices. However, translating this technology to practical applications requires low\uffe2\uff80\uff90cost and high\uffe2\uff80\uff90throughput fabrication methods. Due to the limited choice of materials with suitable optical properties, it is particularly challenging to produce metasurfaces for the technologically relevant mid\uffe2\uff80\uff90infrared spectral range. These constraints are overcome by realizing functional metasurfaces on almost completely transparent free\uffe2\uff80\uff90standing metal\uffe2\uff80\uff90oxide membranes. A versatile nanofabrication process is developed and implemented for highly efficient dielectric and plasmonic mid\uffe2\uff80\uff90infrared metasurfaces with wafer\uffe2\uff80\uff90scale and complementary metal\uffe2\uff80\uff93oxide\uffe2\uff80\uff93semiconductor (CMOS)\uffe2\uff80\uff90compatible manufacturing techniques. The advantages of this method are revealed by demonstrating highly uniform and functional metasurfaces, including high\uffe2\uff80\uff90Q structures enabling fine spectral selectivity, large\uffe2\uff80\uff90area metalenses\uffc2\uffa0with\uffc2\uffa0diffraction\uffe2\uff80\uff90limited focusing capabilities, and birefringent metasurfaces providing polarization control at record\uffe2\uff80\uff90high conversion efficiencies.\uffc2\uffa0 Aluminum plasmonic devices and their integration into microfluidics for real\uffe2\uff80\uff90time and label\uffe2\uff80\uff90free mid\uffe2\uff80\uff90infrared biosensing of proteins and lipid vesicles are further demonstrated. The versatility of this approach and its compatibility with mass\uffe2\uff80\uff90production processes bring infrared metasurfaces markedly closer to commercial applications, such as thermal imaging, spectroscopy, and biosensing.Bioenergy expansion can significantly impact water resources in the region in which it occurs. Investment, policy, and resource management decisions related to bioenergy should therefore take this critical consideration into account. Water resource impacts can defy easy quantification because water consumption varies spatially and temporally, different water sources are not necessarily commensurable, and impact depends on the state of the resource base that is drawn upon. This perspective offers an assessment framework that operators and policy\uffe2\uff80\uff90makers can use in evaluating projects to avoid or mitigate detrimental effects. We adapt water footprint (WF) and life cycle assessment (LCA) techniques to the bioenergy context, describing comprehensive life cycle inventory (LCI) approaches that account for blue and green water use as well as for pollution effects, varying sources, coproduct allocation, and spatial heterogeneity. Impact assessment requires that characterization (weighting) factors be derived so that consumption values can be summed and compared across resources and locations. We recommend that characterization draw on metrics of water stress, accounting for environmental flow requirements, climatic variability, and non\uffe2\uff80\uff90linearity of water stress effects. Finally, we describe some location\uffe2\uff80\uff90specific impacts of concern that may not be revealed through common analytical approaches and may warrant closer consideration. \uffc2\uffa9 2011 Society of Chemical Industry and John Wiley & Sons, Ltd
", "keywords": ["13. Climate action", "0202 electrical engineering", " electronic engineering", " information engineering", "02 engineering and technology", "01 natural sciences", "7. Clean energy", "6. Clean water", "0105 earth and related environmental sciences", "12. Responsible consumption"], "contacts": [{"organization": "Kevin Fingerman, Stuart Orr, Brian Richter, P. Vugteveen, G\u00f6ran Berndes,", "roles": ["creator"]}]}, "links": [{"href": "https://doi.org/10.1002/bbb.294"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Biofuels%2C%20Bioproducts%20and%20Biorefining", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/bbb.294", "name": "item", "description": "10.1002/bbb.294", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/bbb.294"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2011-07-01T00:00:00Z"}}, {"id": "10.1002/jeq2.20119", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:14:05Z", "type": "Journal Article", "created": "2020-07-01", "title": "Global Research Alliance N2O chamber methodology guidelines: Summary of modeling approaches", "description": "AbstractMeasurements of nitrous oxide (N2O) emissions from agriculture are essential for understanding the complex soil\uffe2\uff80\uff93crop\uffe2\uff80\uff93climate processes, but there are practical and economic limits to the spatial and temporal extent over which measurements can be made. Therefore, N2O models have an important role to play. As models are comparatively cheap to run, they can be used to extrapolate field measurements to regional or national scales, to simulate emissions over long time periods, or to run scenarios to compare mitigation practices. Process\uffe2\uff80\uff90based models can also be used as an aid to understanding the underlying processes, as they can simulate feedbacks and interactions that can be difficult to distinguish in the field. However, when applying models, it is important to understand the conceptual process differences in models, how conceptual understanding changed over time in various models, and the model requirements and limitations to ensure that the model is well suited to the purpose of the investigation and the type of system being simulated. The aim of this paper is to give the reader a high\uffe2\uff80\uff90level overview of some of the important issues that should be considered when modeling. This includes conceptual understanding of widely used models, common modeling techniques such as calibration and validation, assessing model fit, sensitivity analysis, and uncertainty assessment. We also review examples of N2O modeling for different purposes and describe three commonly used process\uffe2\uff80\uff90based N2O models (APSIM, DayCent, and DNDC).A meta\uffe2\uff80\uff90analysis data\uffe2\uff80\uff90driven approach is developed to represent the soil evaporative efficiency (SEE) defined as the ratio of actual to potential soil evaporation. The new model is tested across a bare soil database composed of more than 30 sites around the world, a clay fraction range of 0.02\uffe2\uff80\uff930.56, a sand fraction range of 0.05\uffe2\uff80\uff930.92, and about 30,000 acquisition times. SEE is modeled using a soil resistance (rss) formulation based on surface soil moisture (\uffce\uffb8) and two resistance parameters and \uffce\uffb8efolding. The data\uffe2\uff80\uff90driven approach aims to express both parameters as a function of observable data including meteorological forcing, cut\uffe2\uff80\uff90off soil moisture value at which SEE=0.5, and first derivative of SEE at , named . An analytical relationship between and is first built by running a soil energy balance model for two extreme conditions with rss\uffe2\uff80\uff89=\uffe2\uff80\uff890 and using meteorological forcing solely, and by approaching the middle point from the two (wet and dry) reference points. Two different methods are then investigated to estimate the pair either from the time series of SEE and \uffce\uffb8 observations for a given site, or using the soil texture information for all sites. The first method is based on an algorithm specifically designed to accomodate for strongly nonlinear relationships and potentially large random deviations of observed SEE from the mean observed . The second method parameterizes as a multi\uffe2\uff80\uff90linear regression of clay and sand percentages, and sets to a constant mean value for all sites. The new model significantly outperformed the evaporation modules of ISBA (Interaction Sol\uffe2\uff80\uff90Biosph\uffc3\uffa8re\uffe2\uff80\uff90Atmosph\uffc3\uffa8re), H\uffe2\uff80\uff90TESSEL (Hydrology\uffe2\uff80\uff90Tiled ECMWF Scheme for Surface Exchange over Land), and CLM (Community Land Model). It has potential for integration in various land\uffe2\uff80\uff90surface schemes, and real calibration capabilities using combined thermal and microwave remote sensing data.The land surface controls the partitioning of water and energy fluxes and therefore plays a crucial role in the climate system. The coupling between soil moisture and air temperature, in particular, has been shown to affect the severity and occurrence of temperature extremes and heat waves. Here we study soil moisture\uffe2\uff80\uff90temperature coupling in five land surface models, focusing on the terrestrial segment of the coupling in the warm season. All models are run off\uffe2\uff80\uff90line over a common period with identical atmospheric forcing data, in order to allow differences in the results to be attributed to the models' partitioning of energy and water fluxes. Coupling is calculated according to two semiempirical metrics, and results are compared to observational flux tower data. Results show that the locations of the global hot spots of soil moisture\uffe2\uff80\uff90temperature coupling are similar across all models and for both metrics. In agreement with previous studies, these areas are located in transitional climate regimes. The magnitude and local patterns of model coupling, however, can vary considerably. Model coupling fields are compared to tower data, bearing in mind the limitations in the geographical distribution of flux towers and the differences in representative area of models and in situ data. Nevertheless, model coupling correlates in space with the tower\uffe2\uff80\uff90based results (r = 0.5\uffe2\uff80\uff930.7), with the multimodel mean performing similarly to the best\uffe2\uff80\uff90performing model. Intermodel differences are also found in the evaporative fractions and may relate to errors in model parameterizations and ancillary data of soil and vegetation characteristics.
", "keywords": ["ENVIRONMENT SIMULATOR JULES", "FLUXES", "0207 environmental engineering", "02 engineering and technology", "01 natural sciences", "CO2 EXCHANGE", "models", "WATER", "SCALE", "Research Articles", "0105 earth and related environmental sciences", "land surface", "CARBON-DIOXIDE EXCHANGE", "eartH2Observe", "temperature", "15. Life on land", "DECIDUOUS FOREST", "CLIMATE", "EVAPORATION", "VARIABILITY", "13. Climate action", "Earth and Environmental Sciences", "BALANCE", "land surface models", "SENSIBLE HEAT", "land-atmosphere interactions", "soil moisture"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2017JD027346"}, {"href": "https://doi.org/10.1002/2017JD027346"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Atmospheres", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2017JD027346", "name": "item", "description": "10.1002/2017JD027346", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2017JD027346"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2018-02-01T00:00:00Z"}}, {"id": "10.1002/2016JD026042", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:14:01Z", "type": "Journal Article", "created": "2017-06-17", "title": "Relation between precipitation location and antecedent/subsequent soil moisture spatial patterns", "description": "AbstractRecent evidence has shown that relations between soil moisture and precipitation at spatial and temporal aspect are contrary to each other: afternoon precipitation tends to occur at times in which conditions are overall wet and heterogeneous in the morning, but preferentially over those patches that are relatively drier than the surroundings. This study expands the notion of soil moisture\uffe2\uff80\uff90precipitation spatial coupling by analyzing the preferred precipitation location over a range of different soil moisture patterns. Using global observations of precipitation and observationally constrained evaporative stress estimates, we confirm that relatively drier patches have more chances of receiving rain, but the preference is weakened under wetter soil conditions. During extremely wet times, wet patches have more chances of receiving rain. Moreover, the preference of precipitation to occur on drier soils is stronger when soil moisture conditions are heterogeneous. Such results indicate that the positive feedback mechanism becomes more positive as soil wetness increases and the negative feedback mechanism becomes more negative as soils become drier and more heterogeneous. The strength of these two feedback mechanisms jointly affects preferential precipitation location. Counterintuitively, analysis from 1\uffc2\uffa0day after\uffe2\uff80\uff90event soil moisture pattern shows that negative soil moisture\uffe2\uff80\uff90precipitation coupling may in turn further heterogenize soil moisture patterns, because dry patch gets extremely wet with no or less rain in surrounding. Although results here do not necessarily imply a causal relationship, this work contributes to enhancing our understanding of soil moisture\uffe2\uff80\uff90precipitation spatial coupling and exposes the complex nuances of these land\uffe2\uff80\uff90atmosphere interactions.
", "keywords": ["13. Climate action", "0207 environmental engineering", "02 engineering and technology", "15. Life on land", "01 natural sciences", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2016JD026042"}, {"href": "https://doi.org/10.1002/2016JD026042"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Atmospheres", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2016JD026042", "name": "item", "description": "10.1002/2016JD026042", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2016JD026042"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-06-27T00:00:00Z"}}, {"id": "10.1002/2016JD026099", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:14:02Z", "type": "Journal Article", "created": "2017-04-07", "title": "Global soil moisture bimodality in satellite observations and climate models", "description": "AbstractA new diagnostic metric based on soil moisture bimodality is developed in order to examine and compare soil moisture from satellite observations and Earth System Models. The methodology to derive this diagnostic is based on maximum likelihood estimator encoded into an iterative algorithm, which is applied to the soil moisture probability density function. This metric is applied to satellite data from the Advanced Microwave Scanning Radiometer for the Earth Observing System and global climate models data from the Coupled Model Intercomparison Project Phase 5 (CMIP5). Results show high soil moisture bimodality in transitional climate areas and high latitudes, potentially associated with land\uffe2\uff80\uff90atmosphere feedback processes. When comparing satellite versus climate models, a clear difference in their soil moisture bimodality is observed, with systematically higher values in the case of CMIP5 models. These differences appear related to areas where land\uffe2\uff80\uff90atmospheric feedback may be overestimated in current climate models.
", "keywords": ["PREFERENTIAL STATES", "IMPACT", "MIXTURE", "SCHEME", "0207 environmental engineering", "NORMAL-DISTRIBUTIONS", "02 engineering and technology", "15. Life on land", "01 natural sciences", "PART I", "satellite soil moisture", "climate models", "13. Climate action", "Earth and Environmental Sciences", "LAND-SURFACE MODEL", "PRECIPITATION", "SDG 13 - Climate Action", "CMIP5", "ATMOSPHERE COUPLING EXPERIMENT", "land-atmosphere interactions", "soil moisture", "bimodality", "SYSTEM", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2016JD026099"}, {"href": "https://doi.org/10.1002/2016JD026099"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Atmospheres", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2016JD026099", "name": "item", "description": "10.1002/2016JD026099", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2016JD026099"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-04-27T00:00:00Z"}}, {"id": "10.1002/2016JF004060", "type": "Feature", "geometry": null, "properties": {"updated": "2026-09-20T16:14:02Z", "type": "Journal Article", "created": "2017-03-06", "title": "Investigation of rock fragmentation during rockfalls and rock avalanches via 3-D discrete element analyses", "description": "AbstractThis paper investigates the characteristics of dynamic rock fragmentation and its influence on the postfailure fragment trajectory. A series of numerical simulations by discrete element method (DEM) were performed for a simple rock block and slope geometry, where a particle agglomerate of prismatic shape is released along a sliding plane and subsequently collides onto a flat horizontal plane at a sharp kink point. The rock block is modeled as an assembly of bonded spherical particles with fragmentation arising from bond breakages. Bond strength and stiffness were calibrated against available experimental data. We analyzed how dynamic fragmentation occurs at impact, together with the generated fragment size distributions and consequently their runout for different slope topographies. It emerges that after impact, the vertical momentum of the granular system decreases sharply to nil, while the horizontal momentum increases suddenly and then decreases. The sudden boost of horizontal momentum can effectively facilitate the transport of fragments along the bottom floor. The rock fragmentation intensity is associated with the input energy and increases quickly with the slope angle. Gentle slopes normally lead to long spreading distance and large fragments, while steep slopes lead to high momentum boosts and impact forces, with efficient rock fragmentation and fine deposits. The fragment size decreases, while the fracture stress and fragment number both increase with the impact loading strain rate, supporting the experimental observations. The fragment size distributions can be well fitted by the Weibull's distribution function.
", "keywords": ["550", "DEM; dynamic fragmentation; loading rate; momentum boost; rock avalanche; runout;", "13. Climate action", "0211 other engineering and technologies", "02 engineering and technology", "Fragmentation", " rockslide", " rockavalanche", " DEM", " numerical modeling", " runout", "551", "01 natural sciences", "0105 earth and related environmental sciences"]}, "links": [{"href": "https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/2016JF004060"}, {"href": "https://eprints.ncl.ac.uk/fulltext.aspx?url=237479/388C5B83-7098-4BA3-A221-B7B1CEFCC63B.pdf&pub_id=237479"}, {"href": "https://doi.org/10.1002/2016JF004060"}, {"rel": "related", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/Journal%20of%20Geophysical%20Research%3A%20Earth%20Surface", "name": "related record", "description": "related record", "type": "application/json"}, {"rel": "self", "type": "application/geo+json", "title": "10.1002/2016JF004060", "name": "item", "description": "10.1002/2016JF004060", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items/10.1002/2016JF004060"}, {"rel": "collection", "type": "application/json", "title": "Collection", "name": "collection", "description": "Collection", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main"}], "time": {"date": "2017-03-01T00:00:00Z"}}], "links": [{"rel": "self", "type": "application/geo+json", "title": "This document as GeoJSON", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items?keywords=Technology&f=json", "hreflang": "en-US"}, {"rel": "alternate", "type": "text/html", "title": "This document as HTML", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items?keywords=Technology&f=html", "hreflang": "en-US"}, {"rel": "collection", "type": "application/json", "title": "Collection URL", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main", "hreflang": "en-US"}, {"type": "application/geo+json", "rel": "first", "title": "items (first)", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items?keywords=Technology&", "hreflang": "en-US"}, {"rel": "next", "type": "application/geo+json", "title": "items (next)", "href": "https://repository.soilwise-he.eu/cat/collections/metadata:main/items?keywords=Technology&offset=50", "hreflang": "en-US"}], "numberMatched": 2186, "numberReturned": 50, "distributedFeatures": [], "timeStamp": "2026-09-21T06:53:44.706079Z"}